JSM-FMM-1
Honeywell NOTIFIER, System Sensor JSM-FMM-1 — The FMM-1 Monitor Module is intended for use in intelligent, two-wire systems, where the individual address of each modules are selected using the built-in rotary switches. Monitor modules supervise a circuit of dry-contact input devices. Discontinued by Honeywell — no longer in the current range. PartnerPLC sources new, surplus and discontinued Honeywell parts — request a quote for price, condition and lead time.
The FMM-1 Monitor Module is intended for use in intelligent, two-wire systems, where the individual address of each module is selected using the built-in rotary switches. It provides either a two-wire or four-wire fault-tolerant Initiating Device Circuit (IDC) for normally-open-contact fire alarm and supervisory devices. The module has a panel-controlled LED indicator. The FMM-1can be used to replace MMX-1(A) modules in existing systems.Monitor modules supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors. FMM-1 is a standard-sized module (typically mounts to a 4" [10.16 cm] square box) that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices. . Monitored circuit may be wired as an NFPA Style B (Class B) or Style D (Class A) Initiating Device Circuit. A 47K Ohm End-of-Line Resistor (provided) terminates the Style B circuit. No resistor is required for supervision of the Style D circuit. Features & Benefits: Built-in type identification automatically identifies this device as a monitor module to the control panel Powered directly by two-wire SLC loop, No additional power required High noise (EMF/RFI) immunity SEMS screws with clamping plates for ease of wiring Direct-dial entry of address 01 - 159 on Flash Scan loops; 01 - 99 on CLIP loops LED flashes green during normal operation (programmable option) and latches on steady red to indicate alarm Certifications: UL: S635 ULC: S635 FM Approved CSFM Honeywell NOTIFIER, System Sensor JSM-FMM-1 — The FMM-1 Monitor Module is intended for use in intelligent, two-wire systems, where the individual address of each modules are selected using the built-in rotary switches. Monitor modules supervise a circuit of dry-contact input devices. Discontinued by Honeywell — no longer in the current range. PartnerPLC sources new, surplus and discontinued Honeywell parts — request a quote for price, condition and lead time.
| Brand | Honeywell |
| Lifecycle status | discontinued |