M301MJ

Honeywell M301MJ — Mini Monitor Modules are installed in a single-gang junction directly behind the monitored unit. Their small size and light weight allow it to be installed without rigid mounting. Mini Modules are intended for use in intelligent, two-wire systems. Discontinued by Honeywell — no longer in the current range. PartnerPLC sources new, surplus and discontinued Honeywell parts — request a quote for price, condition and lead time.

Mini Monitor Modules are used to monitor a single device or a zone of four-wire smoke detectors, manual fire alarm pull stations, water flow devices, or other normally-open dry-contact devices. They are used to monitor normally-open supervisory devices with special supervisory indication at the control panel. Monitored circuit/device is wired as an NFPA Style B (Class B) Initiating Device Circuit. A 47K ohm End-of-Line Resistor terminates the circuit. Features & Benefits: Built-in type identification automatically identifies this device as a monitor module to the panel Powered directly by two-wire SLC loop. No additional power required High noise (EMF/RFI) immunity Tinned, stripped leads for ease of wiringCertifications: UL: S1570 ULC: S1570 FM Approved CSFM: 7300-0554:131 MEA: 130-00-E FDNY: COA Honeywell M301MJ — Mini Monitor Modules are installed in a single-gang junction directly behind the monitored unit. Their small size and light weight allow it to be installed without rigid mounting. Mini Modules are intended for use in intelligent, two-wire systems. Discontinued by Honeywell — no longer in the current range. PartnerPLC sources new, surplus and discontinued Honeywell parts — request a quote for price, condition and lead time.