ASM58-H

Multiturn absolute rotary encoder. Industrial standard housing ∅58 mm, 30 Bit multiturn, Hardware encoder, Data transfer up to 2 MBaud, Optically isolated RS 422 interface, Enclosure type: 58 mm, Type...

Multiturn absolute rotary encoder. Industrial standard housing ∅58 mm, 30 Bit multiturn, Hardware encoder, Data transfer up to 2 MBaud, Optically isolated RS 422 interface, Enclosure type: 58 mm, Type of shaft: Recessed hollow shaft, Interface: SSI, Detection type: photoelectric sampling, Interface type: SSI, Input type: Selection of counting direction (cw/ccw). Detection type: photoelectric sampling. Device type: Multiturn absolute rotary encoder. Operating voltage: 4.5 ... 30 V DC. No-load supply current: max. 180 mA. Time delay before availability: < 250 ms. Linearity: ± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0,5 LSB at 12 Bit. Output code: Gray code, binary code. Code course (counting direction): cw descending (clockwise rotation, code course descending). Interface type: SSI. Monoflop time: 20 ± 10 µs. Resolution: . Single turnup to 16 BitMultiturn14 BitOverall resolutionup to 30 Bit: . Single turn: up to 16 Bit. Multiturn: 14 Bit. Overall resolution: up to 30 Bit. Transfer rate: 0.1 ... 2 MBit/s. Voltage drop: UB - 2.5 V. Standard conformity: RS 422. Input type: Selection of counting direction (cw/ccw). Signal voltage: . High4.5 ... 30 VLow0 ... 2 V: . High: 4.5 ... 30 V. Low: 0 ... 2 V. Input current: < 6 mA. Switch-on delay: < 10 ms. Connector: type 9416 (M23), 12-pin, type 9416L (M23), 12-pin. Cable: ∅7 mm, 6 x 2 x 0.14 mm2, 1 m. Degree of protection: DIN EN 60529, IP65 (without shaft seal) ; DIN EN 60529, IP66/IP67 (with shaft seal). Climatic testing: DIN EN 60068-2-3, no moisture condensation. Emitted interference: DIN EN 61000-6-4. Noise immunity: DIN EN 61000-6-2. Shock resistance: DIN EN 60068-2-27, 100 g, 6 ms. Vibration resistance: DIN EN 60068-2-6, 20 g, 10 ... 2000 Hz. UL approval: cULus Listed, General Purpose, Class 2 Power Source. Operating temperature: -40 ... 85 °C (-40 ... 185 °F). Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Material: . Combination 1housing: powder coated aluminumflange: aluminumshaft: stainless steelCombination 2 (Inox)housing: stainless steelflange: stainless steelshaft: stainless steel: . Combination 1: housing: powder coated aluminumflange: aluminumshaft: stainless steel. Combination 2 (Inox): housing: stainless steelflange: stainless steelshaft: stainless steel. Mass: approx. 460 g (combination 1) approx. 800 g (combination 2). Rotational speed: max. 12000 min -1. Moment of inertia: 50 gcm2. Starting torque: < 5 Ncm. Shaft load: . Angle offset± 0.9 °Axial offsetstatic: ± 0.3 mm, dynamic: ± 0.1 mmRadial offsetstatic: ± 0.5 mm, dynamic: ± 0.2 mm: . Angle offset: ± 0.9 °. Axial offset: static: ± 0.3 mm, dynamic: ± 0.1 mm. Radial offset: static: ± 0.5 mm, dynamic: ± 0.2 mm

Brand	Pepperl Fuchs
Lifecycle status	active