DK10-LAS/76a/110/124

Print mark contrast sensor. Print mark contrast sensor, 300 mm detection range, red laser light, laser class 2, light/dark on, sensitivity adjuster, push-pull output, emitter switch-off, M12 plug, Las...

Print mark contrast sensor. Print mark contrast sensor, 300 mm detection range, red laser light, laser class 2, light/dark on, sensitivity adjuster, push-pull output, emitter switch-off, M12 plug, Laser print mark contrast sensor for recording very small print marks, Large focus depth range from 3 mm ... 300 mm, Laser class 2, eyesafe, Adjustable sensitivity, 30 µs response time, suitable for extremely rapid scanning processes. Sensor range: 300 mm. Detection range: 3 ... 300 mm. Light source: laser diode. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class2Wave length650 nmBeam divergence< 1.5 mradPulse length1.5 µsRepetition rate108.7 kHzmax. pulse energy2.1 nJ: . Note: LASER LIGHT , DO NOT STARE INTO BEAM. Laser class: 2. Wave length: 650 nm. Beam divergence: < 1.5 mrad. Pulse length: 1.5 µs. Repetition rate: 108.7 kHz. max. pulse energy: 2.1 nJ. Light spot representation: approx. 0.8 mm at a distance of 300 mm. Ambient light limit: . Continuous light40000 Lux: . Continuous light: 40000 Lux. MTTFd: 550 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 60 %. Function indicator: LED yellow: lights up if receiver is lit (light on), lights up if receiver is not lit (dark on). Control elements: Light-on/dark-on changeover switch, sensitivity adjuster. Operating voltage: 10 ... 30 V DC. Ripple: 10 %. No-load supply current: ≤ 55 mA. Test input: emitter deactivation with +Ub. Switching type: light/dark on switchable. Signal output: Push-pull output, short-circuit protected, reverse polarity protected. Switching voltage: PNP: UB - 2.5 V / NPN: URest 1.5 V. Switching current: max. 200 mA. Switching frequency: 16.5 kHz. Response time: 30 µs. Product standard: EN 60947-5-2. Laser safety: IEC 60825-1:2007. Standard conformity: . Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directionsVibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions: . Shock and impact resistance: IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions. Vibration resistance: IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions. UL approval: cULus Listed , Class 2 power source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -10 ... 50 °C (14 ... 122 °F). Storage temperature: -20 ... 75 °C (-4 ... 167 °F). Degree of protection: IP67. Connection: 5-pin, M12 x 1 connector. Material: . HousingPC (glass-fiber-reinforced Makrolon)Optical faceglass: . Housing: PC (glass-fiber-reinforced Makrolon). Optical face: glass. Mass: 200 g. Dimensions: . Height85.6 mmWidth33 mmDepth60.8 mm: . Height: 85.6 mm. Width: 33 mm. Depth: 60.8 mm

Brand	Pepperl Fuchs
Lifecycle status	active