HD2-DM-A

Advanced Diagnostic Module. Advanced diagnostic module, plug-in module for the fieldbus power hub, Comprehensive diagnostics for fieldbus physical layer and power supply, Plug-in Module for the FieldC...

Advanced Diagnostic Module. Advanced diagnostic module, plug-in module for the fieldbus power hub, Comprehensive diagnostics for fieldbus physical layer and power supply, Plug-in Module for the FieldConnex Power Hub, Precise measurements through passive circuits, For commissioning, online monitoring and troubleshooting, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada. Design / Mounting: Motherboard based. Installation in hazardous area: Zone 2 / Div. 2. Rated voltage: 19.2 ... 35 V. Rated current: 110 ... 30 mA. Power dissipation: max. 2 W. Number of segments: 4. Fieldbus type: FOUNDATION Fieldbus/PROFIBUS PA. Rated voltage: 9 ... 32 V. LED PRI PWR: green: on, primary bulk power supply connected. LED SEC PWR: green: on, secondary bulk power supply connected. LED Seg 1...4: yellow: bus activity; red 2 Hz flashing: alarm; red: hardware error. Fault signal: VFC alarm 1 A, 50 V DC, normally closed. DIP switch: diagnostic address 1...247, binary coded. Interface type: diagnostic bus: RS 485. Fieldbus segment/Fieldbus segment: functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff. Fieldbus segment/Supply: functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013: . Directive 2014/30/EU: EN 61326-1:2013. Electromagnetic compatibility: NE 21:2011. Degree of protection: IEC 60529. Shock resistance: EN 60068-2-27. Vibration resistance: EN 60068-2-6. Ambient temperature: -40 ... 70 °C (-40 ... 158 °F). Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Relative humidity: < 95 % non-condensing. Shock resistance: 15 g 11 ms. Vibration resistance: 1 g , 10 ... 150 Hz. Pollution degree: max. 2, according to IEC 60664. Corrosion resistance: acc. to ISA-S71.04-1985, severity level G3. Core cross section: motherboard specific. Housing material: Polycarbonate. Degree of protection: IP20. Mass: approx. 100 g. Dimensions: . Height106 mmWidth18 mmDepth128 mm: . Height: 106 mm. Width: 18 mm. Depth: 128 mm. Mounting: motherboard mounting. Mating cycles: 100. Certificate: TÜV 04 ATEX 2500 X. Marking II 3 G Ex nA IIC T4 Gc: . Marking: II 3 G Ex nA IIC T4 Gc. Directive conformity: . Directive 2014/34/EUEN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010: . Directive 2014/34/EU: EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010. FM approval: . FM certificateFM 19 US 0015 X and FM 19 CA 0011 XFM markingClass I, Division 2, Groups A, B, C, D, T4 / Class I, Zone 2, AEx/Ex ec IIC T4: . FM certificate: FM 19 US 0015 X and FM 19 CA 0011 X. FM marking: Class I, Division 2, Groups A, B, C, D, T4 / Class I, Zone 2, AEx/Ex ec IIC T4. IECEx approval: . IECEx certificateIECEx TUN 13.0038XIECEx markingEx nA IIC T4 Gc: . IECEx certificate: IECEx TUN 13.0038X. IECEx marking: Ex nA IIC T4 Gc. Patents: This product may be covered by the following patent: US7,698,103. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Brand	Pepperl Fuchs
Lifecycle status	active