K23-SSI/USB/25B-C

Signal Converter. Multifunction device with operating modes for incremental rotary encoders, SSI absolute rotary encoders, and rotary encoders with start/stop interface, USB interface for configuring...

Signal Converter. Multifunction device with operating modes for incremental rotary encoders, SSI absolute rotary encoders, and rotary encoders with start/stop interface, USB interface for configuring and reading, Extremely short conversion times, User-definable, non-linear characteristic curve with 24 interpolation points, Auxiliary voltage output 5 V DC and 24 V DC for rotary encoder supply, Operating voltage: 10 ... 30 V DC, Input type: Incremental, Input format: RS422, TTL, HTL differential, HTL PNP, or HTL NPN. MTBF: 56.4 a (continuous operation at 60°C). LED green: status display. Fusing: External: T 0.5 A Reverse polarity protection. Operating voltage: 10 ... 30 V DC. Operating current: approx. 30 mA (Unladen). Supply: Rotary encoder: 5 V DC and 24 V DC (approx. 1 V less than UB) Max. 250 mA. Interface type: USB mini socket type B. Transfer rate: 115,200 baud. Flow control: 8none1. Connection of: Clock, /Clock, Data, /Data. Interface type: SSI Managing or managed operations. Frequency range: max. 1 MHz. Load current: max. 3 mA / Ri > 10 kΩ / 10 pF. Resolution: 10 bits … 32 bits. Data format: Binary code or gray code. Interface type: Start/StopRS422 input: 1 x (Start_Stop, /Start_Stop); 1x (ext. Init_In, ext. /Init_In)RS422 output: 1 x (Init_Out, /Init_Out). Resolution: Depends on the speed of the encoder wave guide. Frequency: Init pulse width: 1 s … 9 µs (adjustable)Init pulse frequency: 62.5 ... 5000 Hz (adjustable) Time measured via pulse frequencies: 48 MHz. Input type: Incremental. Input format: RS422, TTL, HTL differential, HTL PNP, or HTL NPN. Connection: Lanes: A, /A, B, /B. Input frequency: RS422: max. 1 MHz (RS422 differential signal > 0.5 V) HTL differential: max. 500 kHz (HTL differential signal > 2 V) TTL/HTL (PNP/NPN): max. 250 kHz. Load current: Max. 6 mA/Ri > 5 kΩ/10 pF. Input type: 3 x Control input. Input format: HTL, PNP (low: 0 V … 3 V, high: 9 V … 30 V). Input frequency: max. 10 kHz. Load current: Max. 2 mA/Ri > 15 kΩ/470 pF. Number/Type: Parallel. Signal: Push/pull. Output current: Gray-Code, Binary-Code, BCD-Code. Resolution: 25 bit. Contact loading: max. 35 V on COM+ (Short-circuit resistance up to 27 V) max. 20 kA at 24 V (Ri = 600 Ω). Sampling time: 0.001 s … 9.999 s (adjustable). Operating temperature: -20 ... 60 °C (-4 ... 140 °F) (noncondensing). Storage temperature: -25 ... 75 °C (-13 ... 167 °F) (noncondensing). Degree of protection: IP20. Connection: screw terminals 1.5 mm², AWG 16 25-pin Sub-D socket. Material: . Housingplastic: . Housing: plastic. Installation: on 35 mm DIN mounting rail acc. to EN 60715:2001. Mass: approx. 100 g. Dimensions: . Height102 mmWidth23 mmDepth102 mm: . Height: 102 mm. Width: 23 mm. Depth: 102 mm

Brand	Pepperl Fuchs
Lifecycle status	active