KCD2-E2L

Sensor output interface terminal. Single-channel terminal amplifier with line breakage detection, input for NAMUR sensors, DC 24 V supply voltage, standardized interface to prevent signal transmission...

Sensor output interface terminal. Single-channel terminal amplifier with line breakage detection, input for NAMUR sensors, DC 24 V supply voltage, standardized interface to prevent signal transmission errors, switching state display, LED yellow. MTTFd: 1837 a. LED yellow: switching output lead breakage: LED off, output locked. Operating voltage: 10 ... 30 V DC. Ripple: ≤ 10 %. Operating current: approx. 22 mA. Connection: terminals 1+, 2-. Connectable sensor types: NAMUR. Pulse length/pulse interval: ≥ 0.5 ms / ≥ 0.5 ms. Short-circuit current: approx. 8 mA. Sensor supply: 8 V DC, max. 9 V DC at input resistance min. 562 Ω. Switching point: 1.2 ... 2.1 mA hysteresis approx. 0.2 mA. Line fault detection: with. Trip value: 1 kHz. Connection: terminal 4+. Current: 200 mA short-circuit protected. Transistor: PNP. Signal level: UB - 1.1V. Mode of operation: NO contact. Switching frequency: 1 kHz. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013: . Directive 2014/30/EU: EN 61326-1:2013. Degree of protection: EN 60529:2000. Noise immunity: EN 61326-1:2013. Ambient temperature: -25 ... 70 °C (-13 ... 158 °F). Storage temperature: -25 ... 85 °C (-13 ... 185 °F). Degree of protection: IP20. Connection: self-opening apparatus connection terminals, max. core cross section 0.34 ... 2.5 mm2. Mass: 60 g. Dimensions: 20x60x40(in mm)

Brand	Pepperl Fuchs
Lifecycle status	active