NAB2-8GM35-E2-IO

Inductive sensor. Switching function: Normally open/closed (NO/NC) programmable, Output type: PNP, Installation: flush, Output polarity: DC, Output type: 3-wire, Thread mold: M8, Construction type: Cy...

Inductive sensor. Switching function: Normally open/closed (NO/NC) programmable, Output type: PNP, Installation: flush, Output polarity: DC, Output type: 3-wire, Thread mold: M8, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V (SIO mode) <BR>18 ... 30 V (IO-Link), Switching frequency: SIO mode: 750 Hz (high speed filter), Type of voltage: DC, Interface type: IO-Link ( via C/Q = pin 4 ), Connection type: cable, Housing material: brass , white bronze coated. Switching function: Normally open/closed (NO/NC) programmable. Output type: PNP. Installation: flush. Output polarity: DC. Actuating element: mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 8 mm x 8 mm x 1 mm. Measuring range: 0 ... 2 mm. Output type: 3-wire. Operating voltage: 10 ... 30 V (SIO mode) 18 ... 30 V (IO-Link). Switching frequency: SIO mode: 750 Hz (high speed filter). Hysteresis: 1 ... 20 % ( factory setting: 5 % ). Reverse polarity protection: reverse polarity protected. Short-circuit protection: pulsing. Voltage drop: ≤ 1 V. Linearity error: ± 3 % of full-scale value. Temperature drift: ± 10 % of full-scale value. Repeat accuracy: ± 1 % of full-scale value. Speed measuring range: 1 ... 800 mm/s. Speed measurement accuracy: ± 20 % of the full-scale value. Speed measurement repeat accuracy: ± 5 % of the full-scale value. Operating current: 0 ... 100 mA. Off-state current: max. 30 µA. No-load supply current: 17 mA. Time delay before availability: max. 100 ms. Switching state indicator: LED, yellow permanently on: switching ouput active permanently off: switching output inactive fast flashing (10 Hz): fault state. MTTFd: 1382 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Interface type: IO-Link ( via C/Q = pin 4 ). IO-Link revision: 1.1. Device profile: Identification and Diagnosis - I&D Smart Sensor - SSP 0 Smart Sensor - SSP 4.1.1. Process data: Input: 32 Bit - measurement value 16 Bit - scaling 8 Bit - Diagnosis signals 3 Bit - switching signals 2 Bit. Vendor ID: 1 (0x0001). Device ID: 2098945 (0x200701). Transfer rate: COM2 (38.4 kBit/s). Min. cycle time: 3.2 ms. SIO mode support: yes. Compatible master port type: Class A , Class B. PWIS conformity: VDMA 24364-C1/T100°C-W. Standard conformity: . StandardsEN IEC 60947-5-2 EN IEC 60947-5-7: . Standards: EN IEC 60947-5-2 EN IEC 60947-5-7. UL approval: cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 100 mA. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -25 ... 70 °C (-13 ... 158 °F). Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Connection type: cable. Housing material: brass , white bronze coated. Sensing face: LCP, green. Degree of protection: IP65 / IP67. Cable: . Wire end ferrulesyesCable diameter3.3 mm ± 0.15 mmBending radius> 10 x cable diameterMaterialPVCColorblackNumber of cores3Core cross section0.14 mm2LengthL2 m: . Wire end ferrules: yes. Cable diameter: 3.3 mm ± 0.15 mm. Bending radius: > 10 x cable diameter. Material: PVC. Color: black. Number of cores: 3. Core cross section: 0.14 mm2. Length: 2 m. Mass: 47 g. Dimensions: . Length35 mmDiameter8 mm: . Length: 35 mm. Diameter: 8 mm. Mounting: with Nut M8. Tightening torque: ≤ 3 Nm. Scope of delivery: 2 self locking nuts in scope of delivery

Brand	Pepperl Fuchs
Lifecycle status	active