NAN20-30GM50-U-V1

Inductive sensor. Output type: Analog voltage output, Installation: non-flush, Output polarity: DC, Output type: 3-wire, Thread mold: M30, Construction type: Cylindrical, thread, Series: Cylindrical t...

Inductive sensor. Output type: Analog voltage output, Installation: non-flush, Output polarity: DC, Output type: 3-wire, Thread mold: M30, Construction type: Cylindrical, thread, Series: Cylindrical type, Type of voltage: DC, Connection type: Connector plug, Housing material: brass , white bronze coated, Degree of protection: IP65/IP67/IP68, Threading: M12 x 1. Output type: Analog voltage output. Installation: non-flush. Output polarity: DC. Actuating element: mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 60 mm x 60 mm x 1 mm. Measuring range: 0 ... 20 mm. Output type: 3-wire. Operating voltage: 15 ... 30 V. Reverse polarity protection: reverse polarity protected. Short-circuit protection: current limited. Linearity error: ± 3 % of full-scale value. Temperature drift: ± 10 % of full-scale value. Repeat accuracy: ± 1 % of full-scale value. Recovery time: ≤ 50 ms. No-load supply current: 12 mA. Status indicator: Multihole-LED, yellow permanently on: damping element within measuring range slowly flashing (2 Hz): damping element outside measuring range fast flashing (10 Hz): fault state. MTTFd: 918 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Output type: 0 ... 10 V. Slope of output characteristic: 0.5 V / mm. Load resistor: ≥ 500 Ω. Settling time: ≤ 100 ms. PWIS conformity: VDMA 24364-A1/B2/C1/T100°C-W. Standard conformity: . StandardsEN IEC 60947-5-2 EN IEC 60947-5-7: . Standards: EN IEC 60947-5-2 EN IEC 60947-5-7. Protection class: II. Rated insulation voltageUi30 VRated impulse withstand voltageUimp500 V: Ui. Rated insulation voltage: 30 V. Rated impulse withstand voltage: 500 V. UL approval: cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -25 ... 70 °C (-13 ... 158 °F). Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Connection type: Connector plug. Housing material: brass , white bronze coated. Sensing face: PBT , green. Degree of protection: IP65/IP67/IP68. Connector: . ThreadingM12 x 1Number of pins3: . Threading: M12 x 1. Number of pins: 3. Mass: 136 g. Dimensions: . Length66 mmDiameter30 mm: . Length: 66 mm. Diameter: 30 mm. Mounting: with nuts, M30. Tightening torque: ≤ 30 Nm. Scope of delivery: 2 self locking nuts in scope of delivery

Brand	Pepperl Fuchs
Lifecycle status	active