NAN30-L2-E2-IO-V1

Inductive sensor. Switching function: Normally open/closed (NO/NC) programmable, Output type: PNP, Installation: non-flush, Output polarity: DC, Output type: 3-wire, Construction type: <i>VariKont L</...

Inductive sensor. Switching function: Normally open/closed (NO/NC) programmable, Output type: PNP, Installation: non-flush, Output polarity: DC, Output type: 3-wire, Construction type: <i>VariKont L</i> ^®, Series: <i>VariKont L</i> ^®, Operating voltage: 10 ... 30 V (SIO mode) <BR>18 ... 30 V (IO-Link), Switching frequency: SIO mode: 250 Hz (high speed filter), Type of voltage: DC, Interface type: IO-Link ( via C/Q = pin 4 ), Connection type: Connector plug, Housing material: PA. Switching function: Normally open/closed (NO/NC) programmable. Output type: PNP. Installation: non-flush. Output polarity: DC. Actuating element: mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 90 mm x 90 mm x 1 mm. Measuring range: 0 ... 30 mm. Output type: 3-wire. Operating voltage: 10 ... 30 V (SIO mode) 18 ... 30 V (IO-Link). Switching frequency: SIO mode: 250 Hz (high speed filter). Hysteresis: 1 ... 20 % ( factory setting: 5 % ). Reverse polarity protection: reverse polarity protected. Short-circuit protection: pulsing. Voltage drop: ≤ 1 V. Linearity error: ± 3 % of full-scale value. Temperature drift: ± 10 % of full-scale value. Repeat accuracy: ± 1 % of full-scale value. Speed measuring range: 1 ... 3000 mm/s. Speed measurement accuracy: ± 20 % of the full-scale value. Speed measurement repeat accuracy: ± 5 % of the full-scale value. Operating current: 0 ... 100 mA. Off-state current: max. 30 µA. No-load supply current: 22 mA. Time delay before availability: max. 100 ms. Operating voltage indicator: LED, green. Switching state indicator: LED, yellow permanently on: switching ouput active permanently off: switching output inactive fast flashing (10 Hz): fault state. MTTFd: 1266 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Interface type: IO-Link ( via C/Q = pin 4 ). IO-Link revision: 1.1. Device profile: Identification and Diagnosis - I&D Smart Sensor - SSP 0 Smart Sensor - SSP 4.1.1. Process data: Input: 32 Bit - measurement value 16 Bit - scaling 8 Bit - Diagnosis signals 3 Bit - switching signals 2 Bit. Vendor ID: 1 (0x0001). Device ID: 2098953 (0x200709). Transfer rate: COM2 (38.4 kBit/s). Min. cycle time: 3.2 ms. SIO mode support: yes. Compatible master port type: Class A , Class B. PWIS conformity: VDMA 24364-A1/B2/C1/T100°C-W. Standard conformity: . StandardsEN IEC 60947-5-2 EN IEC 60947-5-7: . Standards: EN IEC 60947-5-2 EN IEC 60947-5-7. Protection class: II. Rated insulation voltageUi30 VRated impulse withstand voltageUimp500 V: Ui. Rated insulation voltage: 30 V. Rated impulse withstand voltage: 500 V. UL approval: cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 100 mA. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -25 ... 70 °C (-13 ... 158 °F). Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Connection type: Connector plug. Housing material: PA. Sensing face: PA. Degree of protection: IP65 / IP67. Connector: . ThreadingM12 x 1Number of pins4: . Threading: M12 x 1. Number of pins: 4. Mass: 145 g. Dimensions: . Height40 mmWidth40 mmLength67 mm: . Height: 40 mm. Width: 40 mm. Length: 67 mm

Brand	Pepperl Fuchs
Lifecycle status	active