NAN30-L2-U-V1
Inductive sensor. Output type: Analog voltage output, Installation: non-flush, Output polarity: DC, Output type: 3-wire, Construction type: <i>VariKont L</i> <sup>®</sup>, Series: <i>VariKont L</i> <s...
Inductive sensor. Output type: Analog voltage output, Installation: non-flush, Output polarity: DC, Output type: 3-wire, Construction type: <i>VariKont L</i> <sup>®</sup>, Series: <i>VariKont L</i> <sup>®</sup>, Type of voltage: DC, Connection type: Connector plug, Housing material: PA, Degree of protection: IP65 / IP67, Threading: M12 x 1. Output type: Analog voltage output. Installation: non-flush. Output polarity: DC. Actuating element: mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 90 mm x 90 mm x 1 mm. Measuring range: 0 ... 30 mm. Output type: 3-wire. Operating voltage: 15 ... 30 V. Reverse polarity protection: reverse polarity protected. Short-circuit protection: current limited. Linearity error: ± 3 % of full-scale value. Temperature drift: ± 10 % of full-scale value. Repeat accuracy: ± 1 % of full-scale value. Recovery time: ≤ 50 ms. No-load supply current: 12 mA. Operating voltage indicator: LED, green. Status indicator: LED, yellow permanently on: damping element within measuring range slowly flashing (2 Hz): damping element outside measuring range fast flashing (10 Hz): fault state. MTTFd: 854 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Output type: 0 ... 10 V. Slope of output characteristic: 0.3 mA / mm. Load resistor: ≥ 500 Ω. Settling time: ≤ 100 ms. PWIS conformity: VDMA 24364-A1/B2/C1/T100°C-W. Standard conformity: . StandardsEN IEC 60947-5-2: . Standards: EN IEC 60947-5-2. Protection class: II. Rated insulation voltageUi30 VRated impulse withstand voltageUimp500 V: Ui. Rated insulation voltage: 30 V. Rated impulse withstand voltage: 500 V. UL approval: cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -25 ... 70 °C (-13 ... 158 °F). Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Connection type: Connector plug. Housing material: PA. Sensing face: PA. Degree of protection: IP65 / IP67. Connector: . ThreadingM12 x 1Number of pins4: . Threading: M12 x 1. Number of pins: 4. Mass: 145 g. Dimensions: . Height40 mmWidth40 mmLength67 mm: . Height: 40 mm. Width: 40 mm. Length: 67 mm
| Brand | Pepperl Fuchs |
| Lifecycle status | active |