NBB20-U4-E2

Inductive sensor. Switching function: Normally open (NO), Output type: PNP, Installation: flush, Output polarity: DC, Output type: 3-wire, Construction type: <i>VariKont</i> ^®, Series: <i>V...

Inductive sensor. Switching function: Normally open (NO), Output type: PNP, Installation: flush, Output polarity: DC, Output type: 3-wire, Construction type: <i>VariKont</i> ^®, Series: <i>VariKont</i> ^®, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: screw terminals, Housing material: PA/metal with epoxy powder coating, Degree of protection: IP68 / IP69K. Switching function: Normally open (NO). Output type: PNP. Rated operating distance: 20 mm. Installation: flush. Output polarity: DC. Assured operating distance: 0 ... 16.2 mm. Actual operating distance: 18 ... 22 mm typ. 20 mm. Reduction factor rAl: 0.33. Reduction factor rCu: 0.31. Reduction factor r304: 0.74. Reduction factor rBrass: 0.41. Output type: 3-wire. Operating voltage: 10 ... 30 V DC. Switching frequency: 0 ... 440 Hz. Hysteresis: typ. 5 %. Reverse polarity protection: reverse polarity protected. Short-circuit protection: pulsing. Voltage drop: ≤ 2 V. Voltage drop at IL: . Voltage drop IL = 1 mA, switching element onUd0.5 ... 2.3 V typ. 0.9 VVoltage drop IL = 10 mA, switching element onUd0.8 ... 2.2 V typ. 1.4 VVoltage drop IL = 20 mA, switching element onUd0.9 ... 2.3 V typ. 1.5 VVoltage drop IL = 50 mA, switching element onUd0.9 ... 2.5 V typ. 1.6 VVoltage drop IL = 100 mA, switching element onUd1 ... 2.6 V typ. 1.8 VVoltage drop IL = 200 mA, switching element onUd1.2 ... 2.8 V typ. 2 V: Ud. Voltage drop IL = 1 mA, switching element on: 0.5 ... 2.3 V typ. 0.9 V. Voltage drop IL = 10 mA, switching element on: 0.8 ... 2.2 V typ. 1.4 V. Voltage drop IL = 20 mA, switching element on: 0.9 ... 2.3 V typ. 1.5 V. Voltage drop IL = 50 mA, switching element on: 0.9 ... 2.5 V typ. 1.6 V. Voltage drop IL = 100 mA, switching element on: 1 ... 2.6 V typ. 1.8 V. Voltage drop IL = 200 mA, switching element on: 1.2 ... 2.8 V typ. 2 V. Operating current: 0 ... 200 mA. Off-state current: 0 ... 0.5 mA typ. 0.01 mA. Off-state current TU =40 °C, switching element off≤ 100 µA: . Off-state current TU =40 °C, switching element off: ≤ 100 µA. No-load supply current: ≤ 10 mA. Time delay before availability: ≤ 50 ms. Operating voltage indicator: LED, green. Switching state indicator: LED, yellow. MTTFd: 1289 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Standard conformity: . StandardsEN IEC 60947-5-2: . Standards: EN IEC 60947-5-2. UL approval: cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -25 ... 85 °C (-13 ... 185 °F). Connection type: screw terminals. Core cross section: max. 2.5 mm2. Housing material: PA/metal with epoxy powder coating. Sensing face: PA. Housing base: metal. Degree of protection: IP68 / IP69K. Mass: 225 g. Dimensions: . Height40 mmWidth40 mmLength118 mm: . Height: 40 mm. Width: 40 mm. Length: 118 mm. Note: Tightening torque: 1.8 Nm (housing)

Brand	Pepperl Fuchs
Lifecycle status	active