NBN25-F135-M18-30M-SET

Inductive Sensor Kit. Extended temperature range, Switching function: Normally open/closed (NO/NC) programmable, Output type: PNP, Installation: flush mountable, Output polarity: DC, Output type: 4-wi...

Inductive Sensor Kit. Extended temperature range, Switching function: Normally open/closed (NO/NC) programmable, Output type: PNP, Installation: flush mountable, Output polarity: DC, Output type: 4-wire, Construction type: Rectangular, Series: Rectangular type, Type of voltage: DC, Interface type: IO-Link ( via C/Q = pin 4 ), Ambient temperature: 0 ... 250 °C (32 ... 482 °F) <BR>Note: M8 connector, 4-pin 0 ... 70 °C (32 ... 158 °F), Connection type: Connector plug, Degree of protection: Sensor head: IP65 <BR>amplifier: IP67. Switching function: Normally open/closed (NO/NC) programmable. Output type: PNP. Rated operating distance: 25 mm. Installation: flush mountable. Output polarity: DC. Assured operating distance: 0 ... 20 mm. Actuating element: Steel Fe360 , 75 mm x 75 mm x 1 mm. Reduction factor rAl: 0.7. Reduction factor rCu: 0.7. Reduction factor r304: 0.6. Reduction factor rBrass: 1.1. Output type: 4-wire. Operating voltage: 10 ... 30 V. Switching frequency: 0 ... 30 Hz. Hysteresis: typ. 5 %. Reverse polarity protection: reverse polarity protected. Short-circuit protection: pulsing. Voltage drop: ≤ 3 V. Operating current: 0 ... 200 mA. Off-state current: 0 ... 0.5 mA typ. 0.1 µA. No-load supply current: ≤ 40 mA. Power consumption: ≤ 420 mW. Time delay before availability: ≤ 300 ms. Status indicator: Dual color-LED, yellow/green SIO mode: yellow = switching stategreen = power supply on IO-Link mode: see manual. Interface type: IO-Link ( via C/Q = pin 4 ). IO-Link revision: 1.1. Device profile: Identification and Diagnosis - I&D Smart Sensor - SSP 1.1. Process data: Input 5 Bit - switching signal 1 Bit - uncertainty indication 1 Bit - status signal 1 Bit - maintenance warning 1 Bit. Vendor ID: 1 (0x0001). Device ID: 2098689 (0x200601). Transfer rate: COM2 (38.4 kBit/s). Min. cycle time: 2.3 ms. SIO mode support: yes. Compatible master port type: Class A Class B (use 3-pole adapter or 3-wire cable). Designation: Sync. Input/output type: 1 synchronization connection, bidirectional. PWIS conformity: VDMA24364-B1/B2/C1/T220°C-W. Standard conformity: . StandardsEN IEC 60947-5-2:2020 EN IEC 60947-5-2:2020-03 /RoHs-IICommunication interfaceIEC 61131-9 / IO-Link V1.1.3: . Standards: EN IEC 60947-5-2:2020 EN IEC 60947-5-2:2020-03 /RoHs-II. Communication interface: IEC 61131-9 / IO-Link V1.1.3. Protection class: III. Rated insulation voltageUi36 VRated impulse withstand voltageUimp500 V: Ui. Rated insulation voltage: 36 V. Rated impulse withstand voltage: 500 V. UL approval: cULus Listed, General Purpose, Class 2 Power Source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: 0 ... 250 °C (32 ... 482 °F) Note: M8 connector, 4-pin 0 ... 70 °C (32 ... 158 °F). Storage temperature: 0 ... 70 °C (32 ... 158 °F). Vibration resistance: 30 g. Connection type: Connector plug. Degree of protection: Sensor head: IP65 amplifier: IP67. Material: . HousingSensor head: PEEK 450, 30% fibre glass amplifier: Stainless steel 1.4305 / AISI 303Mounting materialsMounting bracket made of aluminum 3.3206: . Housing: Sensor head: PEEK 450, 30% fibre glass amplifier: Stainless steel 1.4305 / AISI 303. Mounting materials: Mounting bracket made of aluminum 3.3206. Connector: . ThreadingM12 x 1Number of pins4Connection assemblyadditional M8 plug connector on the sensor head side: . Threading: M12 x 1. Number of pins: 4. Connection assembly: additional M8 plug connector on the sensor head side. Cable: . Cable diameter3.9 mmBending radiusfixed installation 7.5 x cable diameter movable installation 15 x cable diameterMaterialPFAColorblackNumber of cores3Core cross section0.34 mm2ShieldgridLengthL30 m: . Cable diameter: 3.9 mm. Bending radius: fixed installation 7.5 x cable diameter movable installation 15 x cable diameter. Material: PFA. Color: black. Number of cores: 3. Core cross section: 0.34 mm2. Shield: grid. Length: 30 m. Mass: 1476 g. Dimensions: . Height44 mm Sensor headWidth40 mm Sensor headLength67 mm Sensor head: . Height: 44 mm Sensor head. Width: 40 mm Sensor head. Length: 67 mm Sensor head. Mounting: amplifier: nuts, M18. Tightening torque: ≤ 30 Nm. Default setting: PNP, NO. Scope of delivery: 2 self locking nuts in scope of delivery

Brand	Pepperl Fuchs
Lifecycle status	active