NBN3-F31K2M-E8-B23-S

Inductive sensor. Extended temperature range, Valve position detection, Solenoid valve output, Switching function: 2 x normally open (NO), Output type: PNP, Installation: for non-flush mounting, Outpu...

Inductive sensor. Extended temperature range, Valve position detection, Solenoid valve output, Switching function: 2 x normally open (NO), Output type: PNP, Installation: for non-flush mounting, Output polarity: DC, Output type: 4-wire, Construction type: Dual sensor, Series: Dual sensor, Type of voltage: DC, Connection (system side): screw terminal , 1/2" NPT cable gland, Housing material: rugged, translucent polycarbonate (PC) optimised for outdoor use, Degree of protection: IP66 / IP68 / IP69. Switching function: 2 x normally open (NO). Output type: PNP. Rated operating distance: 2.5 mm. Installation: for non-flush mounting. Output polarity: DC. Assured operating distance: 0 ... 2.05 mm. Output type: 4-wire. Operating voltage: 10 ... 30 V. Switching frequency: 0 ... 100 Hz. Hysteresis: typ. 5 %. Reverse polarity protection: all connections. Short-circuit protection: pulsing. Voltage drop: ≤ 3 V. Operating current: 0 ... 100 mA. Off-state current: 0 ... 0.5 mA typ. 0.1 µA. No-load supply current: ≤ 25 mA. Operating voltage indicator: LED, green. Switching state indicator: LED, yellow. Valve status indicator: LED, yellow. MTTFd: 490 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Voltage: max. 32 V DC. Current: max. 240 mA. Short-circuit protection: no. Reverse polarity protection: yes, with reversed output LED is out of function, therfore more power for solenoid valve. Standard conformity: . StandardsEN IEC 60947-5-2: . Standards: EN IEC 60947-5-2. UL approval: cULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA. Ambient temperature: -40 ... 75 °C (-40 ... 167 °F). Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Connection (system side): screw terminal , 1/2" NPT cable gland. Core cross section (system side): 1.5/2.5 mm2 flexible/rigid. Connection (valve side): screw terminal , 1/2" NPT cable gland. Housing material: rugged, translucent polycarbonate (PC) optimised for outdoor use. Housing base: powder coated aluminum. Degree of protection: IP66 / IP68 / IP69. Tightening torque, fastening screws: ≤ 5 Nm. Tightening torque, housing screws: 1.5 Nm. Tightening torque, earthing screw: 1.5 Nm. Tightening torque, cable gland: Refer to NEC (National Electrical Code), hand-tight then wrench tightened (max. 3 turns). Tightening torque, stopping plug: 2 Nm. Dimensions: . Height53 mmWidth100 mmLength106 mm: . Height: 53 mm. Width: 100 mm. Length: 106 mm

Brand	Pepperl Fuchs
Lifecycle status	active