NBN3-F31K2M-Z8L-B13-S

Inductive sensor. Extended temperature range, Valve position detection, Solenoid valve output, Switching function: 2 x normally open (NO), Output type: Two-wire with minimum off-state current, Install...

Inductive sensor. Extended temperature range, Valve position detection, Solenoid valve output, Switching function: 2 x normally open (NO), Output type: Two-wire with minimum off-state current, Installation: for non-flush mounting, Output polarity: DC, Output type: 2x 2-wire, Construction type: Dual sensor, Series: Dual sensor, Type of voltage: DC, Ambient temperature: -40 ... 75 °C (-40 ... 167 °F) , restriction for use in hazardous area, see instruction manual. Switching function: 2 x normally open (NO). Output type: Two-wire with minimum off-state current. Rated operating distance: 2.5 mm. Installation: for non-flush mounting. Output polarity: DC. Assured operating distance: 0 ... 2.05 mm. Output type: 2x 2-wire. Operating voltage: 6 ... 30 V. Switching frequency: 0 ... 100 Hz. Hysteresis: typ. 0.5 mm. Reverse polarity protection: reverse polarity tolerant. Short-circuit protection: no. Voltage drop: ≤ 6 V. Operating current: 4 ... 100 mA. Off-state current: 100 ... 200 µA typ. 160 µA. Switching state indicator: LED, yellow. Valve status indicator: LED, yellow. MTTFd: 684 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Voltage: max. 32 V DC. Current: max. 240 mA. Short-circuit protection: no. Reverse polarity protection: yes, with reversed output LED is out of function, therfore more power for solenoid valve. Standard conformity: . StandardsEN IEC 60947-5-2: . Standards: EN IEC 60947-5-2. UL approval: cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 100 mA. Ambient temperature: -40 ... 75 °C (-40 ... 167 °F) , restriction for use in hazardous area, see instruction manual. Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Connection (system side): screw terminal , M20 x 1.5 cable gland. Core cross section (system side): 1.5/2.5 mm2 flexible/rigid. Connection (valve side): screw terminal , Cable gland M20 x 1.5. Housing material: rugged, translucent polycarbonate (PC) optimised for outdoor use. Housing base: powder coated aluminum. Degree of protection: IP66 / IP68 / IP69. Tightening torque, fastening screws: ≤ 5 Nm. Tightening torque, housing screws: 1.5 Nm. Tightening torque, earthing screw: 1.5 Nm. Tightening torque, cable gland: M20 x 1.5 ; max. 11 Nm. Tightening torque, stopping plug: 2 Nm. Dimensions: . Height53 mmWidth100 mmLength106 mm: . Height: 53 mm. Width: 100 mm. Length: 106 mm

Brand	Pepperl Fuchs
Lifecycle status	active