NBN4-F25-E8

Inductive sensor. Valve position detection, Switching function: 2 x normally open (NO), Output type: PNP, Installation: flush mountable, Output polarity: DC, Output type: 3-wire, Construction type: Du...

Inductive sensor. Valve position detection, Switching function: 2 x normally open (NO), Output type: PNP, Installation: flush mountable, Output polarity: DC, Output type: 3-wire, Construction type: Dual sensor, Series: Dual sensor, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: cable PVC , 2000 mm, Housing material: PBT, Degree of protection: IP67. Switching function: 2 x normally open (NO). Output type: PNP. Rated operating distance: 4 mm. Installation: flush mountable. Output polarity: DC. Assured operating distance: 0 ... 3.24 mm. Actual operating distance: 3.6 ... 4.4 mm typ.. Reduction factor rAl: 0.5. Reduction factor rCu: 0.4. Reduction factor r304: 1. Reduction factor rSt37: 1.1. Output type: 3-wire. Operating voltage: 10 ... 30 V DC. Switching frequency: 0 ... 1000 Hz. Hysteresis: typ. 5 %. Reverse polarity protection: reverse polarity protected. Short-circuit protection: pulsing. Voltage drop: ≤ 2.5 V. Operating current: 0 ... 200 mA. Off-state current: 0 ... 0.5 mA typ. 0.1 µA at 25 °C. No-load supply current: ≤ 22.5 mA. Time delay before availability: ≤ 100 ms. Operating voltage indicator: LED, green. Switching state indicator: LED, yellow. MTTFd: 860 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Standard conformity: . StandardsEN IEC 60947-5-2: . Standards: EN IEC 60947-5-2. UL approval: cULus Listed Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -25 ... 70 °C (-13 ... 158 °F). Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Connection type: cable PVC , 2000 mm. Core cross section: 0.75 mm2. Housing material: PBT. Sensing face: PC. Degree of protection: IP67. Cable: . Cable diameter4.3 mm ± 0.1 mmBending radius> 15 x cable diameter: . Cable diameter: 4.3 mm ± 0.1 mm. Bending radius: > 15 x cable diameter. Mass: 405 g. Tightening torque, fastening screws: M5 x 25 : ≤ 2.7 Nm. Dimensions: . Height20 mmWidth52 mmLength52 mm: . Height: 20 mm. Width: 52 mm. Length: 52 mm. Note: Mounted on mechanical drive

Brand	Pepperl Fuchs
Lifecycle status	active