NCB40-FP-Z2-P1

Inductive sensor. Switching function: Normally open/closed (NO/NC), Output type: Two-wire, Installation: flush, Output polarity: DC, Output type: 2-wire, Construction type: Rectangular, Series: Rectan...

Inductive sensor. Switching function: Normally open/closed (NO/NC), Output type: Two-wire, Installation: flush, Output polarity: DC, Output type: 2-wire, Construction type: Rectangular, Series: Rectangular type, Type of voltage: DC, Connection type: screw terminals, Housing material: PBT, Degree of protection: IP67. Switching function: Normally open/closed (NO/NC). Output type: Two-wire. Rated operating distance: 40 mm. Installation: flush. Output polarity: DC. Assured operating distance: 0 ... 32.4 mm. Actual operating distance: 36 ... 44 mm typ. 40 mm. Reduction factor rAl: 0.35. Reduction factor rCu: 0.35. Reduction factor r304: 0.8. Output type: 2-wire. Operating voltage: 10 ... 60 V. Switching frequency: 0 ... 50 Hz. Hysteresis: 0 ... 20 % typ. 5 %. Reverse polarity protection: reverse polarity tolerant. Short-circuit protection: pulsing. Voltage drop: ≤ 6 V. Operating current: 2 ... 200 mA. Off-state current: 0.4 ... 1 mA typ. 0.6 mA. Time delay before availability: ≤ 300 ms. Switching state indicator: LED, yellow. Standard conformity: . StandardsEN IEC 60947-5-2: . Standards: EN IEC 60947-5-2. UL approval: cULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 60 V DC Output Switching Current: 200 mA. CCC approval: Certified by China Compulsory Certification (CCC). Ambient temperature: -25 ... 70 °C (-13 ... 158 °F). Storage temperature: -25 ... 85 °C (-13 ... 185 °F). Connection type: screw terminals. Information for connection: A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %. Core cross section: up to 2.5 mm2. Minimum core cross-sectionwithout wire end ferrules 0.5 mm2 , with connector sleeves 0.34 mm2Maximum core cross-sectionwithout wire end ferrules 2.5 mm2 , with connector sleeves 1.5 mm2: . Minimum core cross-section: without wire end ferrules 0.5 mm2 , with connector sleeves 0.34 mm2. Maximum core cross-section: without wire end ferrules 2.5 mm2 , with connector sleeves 1.5 mm2. Housing material: PBT. Sensing face: PBT. Housing base: PBT. Degree of protection: IP67. Dimensions: . Height40 mmWidth84 mmLength84 mm: . Height: 40 mm. Width: 84 mm. Length: 84 mm

Brand	Pepperl Fuchs
Lifecycle status	active