NCN3-F31K2-N5-B33-S

Inductive sensor. Extended temperature range, Valve position detection, Solenoid valve output, Suitable for 2:1 technology, Switching function: 2 x normally closed (NC), Output type: NAMUR, Installati...

Inductive sensor. Extended temperature range, Valve position detection, Solenoid valve output, Suitable for 2:1 technology, Switching function: 2 x normally closed (NC), Output type: NAMUR, Installation: flush mountable, Output type: 2-wire, Construction type: Dual sensor, Series: Dual sensor, Suitable for 2:1 technology, Safety Integrity Level (SIL): SIL 2, Type of voltage: DC, Equipment protection level Ga: IECEx TUR 17.0055X, Equipment protection level Gb: IECEx TUR 17.0055X. Switching function: 2 x normally closed (NC). Output type: NAMUR. Rated operating distance: 3 mm. Installation: flush mountable. Assured operating distance: 0 ... 2.4 mm For assured operating distance sar see Manual Functional Safety.. Actual operating distance: 2.7 ... 3.3 mm typ.. Actuating element: Stainless steel 1.4305 / AISI 303 8.5 mm x 8.5 mm x 0.5 mm. Reduction factor rAl: 0.4. Reduction factor rCu: 0.4. Reduction factor r304: 0.7. Reduction factor rSt37: 1. Reduction factor rBrass: 0.5. Output type: 2-wire. Nominal voltage: 8.2 V (Ri approx. 1 kΩ). Switching frequency: 0 ... 3 kHz. Hysteresis: typ. 5 %. Short-circuit protection: yes. Suitable for 2:1 technology: yes , Reverse polarity protection diode not required. Current consumption: . Measuring plate not detected≥ 3 mAMeasuring plate detected≤ 1 mA: . Measuring plate not detected: ≥ 3 mA. Measuring plate detected: ≤ 1 mA. Time delay before availability: ≤ 1.1 ms. Switching state indicator: LED, yellow. Valve status indicator: LED, yellow. Safety Integrity Level (SIL): SIL 2. MTTFd: 1730 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Voltage: max. 32 V DC. Current: max. 240 mA. Short-circuit protection: no. Reverse polarity protection: yes, with reversed output LED is out of function, therfore more power for solenoid valve. Standard conformity: . NAMUREN 60947-5-6:2000 IEC 60947-5-6:1999Electromagnetic compatibilityNE 21:2007StandardsEN IEC 60947-5-2: . NAMUR: EN 60947-5-6:2000 IEC 60947-5-6:1999. Electromagnetic compatibility: NE 21:2007. Standards: EN IEC 60947-5-2. IECEx approval: . Equipment protection level GaIECEx TUR 17.0055XEquipment protection level GbIECEx TUR 17.0055XEquipment protection level MbIECEx TUR 17.0055X: . Equipment protection level Ga: IECEx TUR 17.0055X. Equipment protection level Gb: IECEx TUR 17.0055X. Equipment protection level Mb: IECEx TUR 17.0055X. ATEX approval: . Equipment protection level GaTÜV 17 ATEX 8125 XEquipment protection level GbTÜV 17 ATEX 8125 XEquipment protection level Gc (ic)PF13CERT2895 X: . Equipment protection level Ga: TÜV 17 ATEX 8125 X. Equipment protection level Gb: TÜV 17 ATEX 8125 X. Equipment protection level Gc (ic): PF13CERT2895 X. UL approval: cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC. Ordinary LocationE87056Hazardous LocationE501628Control drawing116-0455: . Ordinary Location: E87056. Hazardous Location: E501628. Control drawing: 116-0455. CCC approval: . Hazardous Location2020322315002305: . Hazardous Location: 2020322315002305. KCC approval: . Hazardous Location23-AV4BO-0113X: . Hazardous Location: 23-AV4BO-0113X. Ambient temperature: -40 ... 100 °C (-40 ... 212 °F). Storage temperature: -40 ... 100 °C (-40 ... 212 °F). Connection type: screw terminals. Connection (system side): Screw terminals, tightening torque min. 0.5 Nm Stripped length 7 mm , M20 x 1.5 cable gland , usable thread length 13.5 mm , screw-in depth max. 13.5 mm. Core cross section (system side): rigid: 0.14 ... 2.5 mm2 flexible: 0.14 ... 1.5 mm2 flexible with core-end sleeve: 0.25 ... 1.5 mm2. Connection (valve side): 4-pin, M12 x 1 socket. Core cross section (valve side): like core cross section (system side). Housing material: rugged, translucent polycarbonate (PC) optimised for outdoor use. Housing base: PC. Degree of protection: IP66 / IP67 / IP69. Tightening torque, fastening screws: ≤ 5 Nm. Tightening torque, housing screws: 1.5 Nm. Tightening torque, cable gland: M20 x 1.5 ; ≤ 7 Nm. Tightening torque, stopping plug: 1 Nm. Dimensions: . Height53 mmWidth100 mmLength106 mm: . Height: 53 mm. Width: 100 mm. Length: 106 mm. Note: LED switch-off. Use in the hazardous area: see instruction manuals

Brand	Pepperl Fuchs
Lifecycle status	active