NJ15-M1K-A2

Inductive sensor. Switching function: complementary, Output type: PNP, Installation: non-flush, Output polarity: DC, Output type: 4-wire, Construction type: <i>VariKont M</i> ^®, Series: <i>...

Inductive sensor. Switching function: complementary, Output type: PNP, Installation: non-flush, Output polarity: DC, Output type: 4-wire, Construction type: <i>VariKont M</i> ^®, Series: <i>VariKont M</i> ^®, Operating voltage: 10 ... 60 V DC, Type of voltage: DC, Connection type: screw terminals, Housing material: PBT, Degree of protection: IP67. Switching function: complementary. Output type: PNP. Rated operating distance: 15 mm. Installation: non-flush. Output polarity: DC. Assured operating distance: 0 ... 12.15 mm. Reduction factor rAl: 0.39. Reduction factor rCu: 0.36. Reduction factor r304: 0.73. Output type: 4-wire. Operating voltage: 10 ... 60 V DC. Switching frequency: 0 ... 200 Hz. Hysteresis: typ. 5 %. Reverse polarity protection: yes. Short-circuit protection: pulsing. Voltage drop: ≤ 2.5 V. Operating current: 0 ... 200 mA. No-load supply current: ≤ 14.5 mA. Time delay before availability: ≤ 50 ms. Operating voltage indicator: LED, green. Switching state indicator: LED, yellow. MTTFd: 932 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Standard conformity: . StandardsEN IEC 60947-5-2: . Standards: EN IEC 60947-5-2. UL approval: cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 60 V DC Output Switching Current: 200 mA. CCC approval: Certified by China Compulsory Certification (CCC). Ambient temperature: -25 ... 70 °C (-13 ... 158 °F). Connection type: screw terminals. Information for connection: A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %. Core cross section: up to 2.5 mm2. Minimum core cross-sectionwithout wire end ferrules 0.5 mm2 , with connector sleeves 0.34 mm2Maximum core cross-sectionwithout wire end ferrules 2.5 mm2 , with connector sleeves 1.5 mm2: . Minimum core cross-section: without wire end ferrules 0.5 mm2 , with connector sleeves 0.34 mm2. Maximum core cross-section: without wire end ferrules 2.5 mm2 , with connector sleeves 1.5 mm2. Housing material: PBT. Sensing face: PBT. Degree of protection: IP67. Dimensions: . Height30 mmWidth30 mmLength91 mm: . Height: 30 mm. Width: 30 mm. Length: 91 mm

Brand	Pepperl Fuchs
Lifecycle status	active