NJ40+U4+E
Inductive sensor. Switching function: Normally open (NO), Output type: NPN, Installation: non-flush, Output polarity: DC, Output type: 3-wire, Construction type: <i>VariKont</i> <sup>®</sup>, Series:...
Inductive sensor. Switching function: Normally open (NO), Output type: NPN, Installation: non-flush, Output polarity: DC, Output type: 3-wire, Construction type: <i>VariKont</i> <sup>®</sup>, Series: <i>VariKont</i> <sup>®</sup>, Type of voltage: DC, Connection type: screw terminals, Housing material: PBT/metal, Degree of protection: IP68. Switching function: Normally open (NO). Output type: NPN. Rated operating distance: 40 mm. Installation: non-flush. Output polarity: DC. Assured operating distance: 0 ... 32.4 mm. Reduction factor rAl: 0.5. Reduction factor rCu: 0.45. Reduction factor r304: 0.8. Output type: 3-wire. Operating voltage: 10 ... 60 V. Switching frequency: 0 ... 100 Hz. Hysteresis: 1 ... 10 % typ. 5 %. Reverse polarity protection: yes. Short-circuit protection: yes. Voltage drop: ≤ 2.8 V. Operating current: 0 ... 200 mA. No-load supply current: ≤ 10 mA. Time delay before availability: ≤ 100 ms. Operating voltage indicator: LED, green. Switching state indicator: LED, yellow. Standards: IEC / EN 60947-5-2:2004. UL approval: cULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 60 V DC Output Switching Current: 200 mA. CCC approval: Certified by China Compulsory Certification (CCC). Ambient temperature: -25 ... 70 °C (-13 ... 158 °F). Connection type: screw terminals. Information for connection: A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %. Core cross section: up to 2.5 mm2. Minimum core cross-sectionwithout wire end ferrules 0.5 mm2 , with connector sleeves 0.34 mm2Maximum core cross-sectionwithout wire end ferrules 2.5 mm2 , with connector sleeves 1.5 mm2: . Minimum core cross-section: without wire end ferrules 0.5 mm2 , with connector sleeves 0.34 mm2. Maximum core cross-section: without wire end ferrules 2.5 mm2 , with connector sleeves 1.5 mm2. Housing material: PBT/metal. Sensing face: PBT. Degree of protection: IP68. Dimensions: . Height55 mmWidth55 mmLength128 mm: . Height: 55 mm. Width: 55 mm. Length: 128 mm
| Brand | Pepperl Fuchs |
| Lifecycle status | active |