NJ60-FP-A2-P1-Y237070

Inductive sensor. Switching function: complementary, Output type: PNP, Installation: non-flush, Output polarity: DC, Output type: 4-wire, Construction type: Rectangular, Series: Rectangular type, Type...

Inductive sensor. Switching function: complementary, Output type: PNP, Installation: non-flush, Output polarity: DC, Output type: 4-wire, Construction type: Rectangular, Series: Rectangular type, Type of voltage: DC, Connection type: screw terminals, Housing material: POM, Degree of protection: IP68. Switching function: complementary. Output type: PNP. Rated operating distance: 60 mm. Installation: non-flush. Output polarity: DC. Assured operating distance: 0 ... 50 mm. Measuring body: high grade steel tube. Reduction factor rAl: 0.4. Reduction factor rCu: 0.3. Reduction factor r304: 0.85. Bottle speed: ca. 2.5 m/s (65000 btls./h). Output type: 4-wire. Adjustment aid: LED, green/red. Operating voltage: 10 ... 30 V. Switching frequency: 0 ... 100 Hz. Hysteresis: typ. 3 %. Pulse extension: 100 ms. Reverse polarity protection: reverse polarity protected. Short-circuit protection: pulsing. Voltage drop: ≤ 3 V. Operating current: 0 ... 200 mA. No-load supply current: ≤ 20 mA. Time delay before availability: ≤ 20 ms. Operating voltage indicator: LED, green. Switching state indicator: LED, yellow. Standard conformity: . StandardsEN IEC 60947-5-2: . Standards: EN IEC 60947-5-2. UL approval: cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA. Ambient temperature: 0 ... 60 °C (32 ... 140 °F). Connection type: screw terminals. Information for connection: A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %. Core cross section: up to 2.5 mm2. Minimum core cross-sectionwithout wire end ferrules 0.5 mm2 , with connector sleeves 0.34 mm2Maximum core cross-sectionwithout wire end ferrules 2.5 mm2 , with connector sleeves 1.5 mm2: . Minimum core cross-section: without wire end ferrules 0.5 mm2 , with connector sleeves 0.34 mm2. Maximum core cross-section: without wire end ferrules 2.5 mm2 , with connector sleeves 1.5 mm2. Housing material: POM. Sensing face: POM. Degree of protection: IP68. Dimensions: . Height40 mmWidth80 mmLength80 mm: . Height: 40 mm. Width: 80 mm. Length: 80 mm

Brand	Pepperl Fuchs
Lifecycle status	active