OBE20M-R101-S2EP-IO-L

Thru-beam sensor (pair). Laser thru-beam sensor, Miniature design with versatile mounting options, DuraBeam Laser Sensors - durable and employable like an LED, IO-Link interface for service and proces...

Thru-beam sensor (pair). Laser thru-beam sensor, Miniature design with versatile mounting options, DuraBeam Laser Sensors - durable and employable like an LED, IO-Link interface for service and process data, Various frequencies for avoiding mutual interference (cross-talk immunity), Extended temperature range<br>-40 °C ... 60 °C. Emitter: OBE20M-R101-S-IO-L. Receiver: OBE20M-R101-2EP-IO-L. Effective detection range: 0 ... 20 m. Threshold detection range: 30 m. Light source: laser diode. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length680 nmBeam divergence> 5 mrad ; d63 < 2 mm in the range of 250 mm ... 750 mmPulse length1.6 µsRepetition ratemax. 17.6 kHzmax. pulse energy9.6 nJ: . Note: LASER LIGHT , DO NOT STARE INTO BEAM. Laser class: 1. Wave length: 680 nm. Beam divergence: > 5 mrad ; d63 < 2 mm in the range of 250 mm ... 750 mm. Pulse length: 1.6 µs. Repetition rate: max. 17.6 kHz. max. pulse energy: 9.6 nJ. Diameter of the light spot: approx. 50 mm at a distance of 20 m. Opening angle: approx. 0.3 °. Ambient light limit: EN 60947-5-2 : 30000 Lux. MTTFd: 440 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green:constantly on - power onflashing (4Hz) - short circuitflashing with short break (1 Hz) - IO-Link mode. Function indicator: Yellow LED:Permanently lit - light path clearPermanently off - object detectedFlashing (4 Hz) - insufficient operating reserve. Control elements: Receiver: light/dark switch. Control elements: Receiver: sensitivity adjustment. Parameterization indicator: IO link communication: green LED goes out briefly (1 Hz). Operating voltage: 10 ... 30 V DC. Ripple: max. 10 %. No-load supply current: Emitter: ≤ 13 mA Receiver: ≤ 13 mA at 24 V supply voltage. Protection class: III. Interface type: IO-Link ( via C/Q = pin 4 ). IO-Link revision: 1.1. Device ID: Emitter: 0x110402 (1115138)Reciever: 0x110302 (1114882). Transfer rate: COM2 (38.4 kBit/s). Min. cycle time: 2.3 ms. Process data width: Emitter:Process data output: 2 BitReceiver:Process data input: 2 BitProcess data output: 2 Bit. SIO mode support: yes. Compatible master port type: A. Test input: emitter deactivation at +UB. Switching type: The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - WH: NPN normally closed / light-on, PNP normally open / dark-on. Signal output: 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Usage category: DC-12 and DC-13. Voltage drop: ≤ 1.5 V DC. Switching frequency: 1250 Hz. Response time: 0.4 ms. Communication interface: IEC 61131-9. Product standard: EN 60947-5-2. Laser safety: EN 60825-1:2014. UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1. FDA approval: IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.. Ambient temperature: -40 ... 60 °C (-40 ... 140 °F) , cable, fixed installation -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains. Storage temperature: -40 ... 70 °C (-40 ... 158 °F). Degree of protection: IP67 / IP69 / IP69K. Connection: 2 m fixed cable. Material: . HousingPC (Polycarbonate)Optical facePMMA: . Housing: PC (Polycarbonate). Optical face: PMMA. Mass: Emitter: approx. 10 g receiver: approx. 10 g. Dimensions: . Height33.8 mmWidth13.9 mmDepth18.3 mm: . Height: 33.8 mm. Width: 13.9 mm. Depth: 18.3 mm. Cable length: 2 m

Brand	Pepperl Fuchs
Lifecycle status	active