OBG8000-R200-2EP1-IO-V1

Retroreflective sensor (glass). Medium design with versatile mounting options, Detects transparent objects, i.e., clear glass, PET and transparent films, Two machines in one: clear object detection or...

Retroreflective sensor (glass). Medium design with versatile mounting options, Detects transparent objects, i.e., clear glass, PET and transparent films, Two machines in one: clear object detection or reflection operating mode with long range, High degree of protection IP69K, IO-Link interface for service and process data. Effective detection range: 0 ... 5.6 m in TEACH mode ; 0 ... 8 m at switch position "N". Reflector distance: 0 ... 5.6 m in TEACH mode ; 0 ... 8 m at switch position "N". Threshold detection range: 9 m. Reference target: H85-2 reflector. Light source: LED. Light type: modulated visible red light. LED risk group labelling: exempt group. Polarization filter: yes. Diameter of the light spot: approx. 170 mm at a distance of 3.5 m. Opening angle: approx. 5 °. Ambient light limit: EN 60947-5-2 : 18000 Lux. MTTFd: 600 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green:constantly on - power onflashing (4Hz) - short circuitflashing with short break (1 Hz) - IO-Link mode. Function indicator: Yellow LED:Permanently lit - light path clearPermanently off - object detectedFlashing (4 Hz) - insufficient operating reserve. Control elements: Teach-In key. Control elements: 5-step rotary switch for operating modes selection. Contrast detection levels: 10 % - clean, water filled PET bottles 18 % - clear glass bottles 40 % - colored glass or opaque materials Adjustable via rotary switch. Operating voltage: 10 ... 30 V DC. Ripple: max. 10 %. No-load supply current: < 25 mA at 24 V supply voltage. Protection class: III. Interface type: IO-Link. IO-Link revision: 1.1. Device profile: Identification and Diagnosis - I&D Smart Sensor - SSP 2.4. Process data: Input 2 Bit - switching signal 1 Bit - stability alarm 1 Bit Output 2 Bit - Emitter deactivation 1 Bit - evaluation control function 1 Bit. Vendor ID: 1 (0x0001). Device ID: 1120772 (0x111A04). Transfer rate: COM2 (38.4 kBit/s). Min. cycle time: 2.3 ms. SIO mode support: yes. Compatible master port type: A. Switching type: The default setting is: C/Q - Pin4: NPN normally closed / dark-on, PNP normally open / light-on, IO-Link /Q - Pin2: NPN normally open / light-on, PNP normally closed / dark-on. Signal output: 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Usage category: DC-12 and DC-13. Voltage drop: ≤ 1.5 V DC. Switching frequency: 500 Hz. Response time: 1 ms. Communication interface: IEC 61131-9. Product standard: EN 60947-5-2. UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -20 ... 60 °C (-4 ... 140 °F). Storage temperature: -40 ... 70 °C (-40 ... 158 °F). Degree of protection: IP67 / IP69 / IP69K. Connection: 4-pin, M12 x 1 connector, 90° rotatable. Material: . HousingPC (Polycarbonate)Optical facePMMA: . Housing: PC (Polycarbonate). Optical face: PMMA. Mass: approx. 37 g. Dimensions: . Height50.6 mmWidth15 mmDepth41.7 mm: . Height: 50.6 mm. Width: 15 mm. Depth: 41.7 mm

Brand	Pepperl Fuchs
Lifecycle status	active