OBP120-R100-EP-IO-V3-L

Trigger marks sensor. Laser trigger marks sensor, Miniature design with versatile mounting options, For detecting black trigger marks on a white background, DuraBeam Laser Sensors - durable and employ...

Trigger marks sensor. Laser trigger marks sensor, Miniature design with versatile mounting options, For detecting black trigger marks on a white background, DuraBeam Laser Sensors - durable and employable like an LED, Extended temperature range<br>-40 °C ... 60 °C, High degree of protection IP69K. Detection range: 25 ... 120 mm. Adjustment range: 25 ... 120 mm. Reference target: standard white, 100 mm x 100 mm. Light source: laser diode. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length680 nmBeam divergence> 5 mrad d63 < 1 mm in the range of 50 mm ... 250 mmPulse length1.6 µsRepetition rateapprox. 28.5 kHzmax. pulse energy10.4 nJ: . Note: LASER LIGHT , DO NOT STARE INTO BEAM. Laser class: 1. Wave length: 680 nm. Beam divergence: > 5 mrad d63 < 1 mm in the range of 50 mm ... 250 mm. Pulse length: 1.6 µs. Repetition rate: approx. 28.5 kHz. max. pulse energy: 10.4 nJ. Optical resolution: Trigger mark [black, 6%] of 1 mm-wide on a white background [white, 90%]; Contrast difference of min. 50%. Diameter of the light spot: < 1 mm at a distance of 60 mm. Opening angle: approx. 0.3 °. Ambient light limit: EN 60947-5-2 : 40000 Lux. Teach-in: static and dynamic Teach-In. MTTFd: 560 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green:constantly on - power onflashing (4Hz) - short circuitflashing with short break (1 Hz) - IO-Link mode. Function indicator: LED yellow:constantly on - object detectedconstantly off - object not detected. Control elements: Teach-In key. Control elements: 5-step rotary switch for operating modes selection. Rated operating voltage: 10 ... 30 V DC. Ripple: max. 10 %. No-load supply current: < 20 mA at 24 V supply voltage. Protection class: III. Interface type: IO-Link ( via C/Q = pin 4 ). IO-Link revision: 1.1. Device profile: Smart Sensor. Device ID: 0x110C01 (1117185). Transfer rate: COM2 (38.4 kBit/s). Min. cycle time: 2.3 ms. Process data width: Process data input 1 BitProcess data output 2 Bit. SIO mode support: yes. Compatible master port type: A. Switching type: The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link. Signal output: 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Usage category: DC-12 and DC-13. Voltage drop: ≤ 1.5 V DC. Switching frequency: 3300 Hz. Response time: 125 µs. Communication interface: IEC 61131-9. Product standard: EN 60947-5-2. Laser safety: EN 60825-1:2014. Protection class: . Rated insulation voltageUi30 VRated impulse withstand voltageUimp800 V: Ui. Rated insulation voltage: 30 V. Rated impulse withstand voltage: 800 V. UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1. FDA approval: IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.. Ambient temperature: -40 ... 60 °C (-40 ... 140 °F). Storage temperature: -40 ... 70 °C (-40 ... 158 °F). Pollution degree: 3. Degree of protection: IP67 / IP69 / IP69K. Connection: M8 x 1 connector, 3-pin. Material: . HousingPC (Polycarbonate)Optical facePMMA: . Housing: PC (Polycarbonate). Optical face: PMMA. Mass: approx. 10 g. Dimensions: . Height44.5 mmWidth11 mmDepth21.5 mm: . Height: 44.5 mm. Width: 11 mm. Depth: 21.5 mm

Brand	Pepperl Fuchs
Lifecycle status	active