OBR1500-R3F-E2-L

Laser retroreflective sensor. Retroreflective sensor, flat design, M3 mounting, 1500 mm detection range, red light, dark on, PNP output, fixed cable, Very flat design for direct mounting without mount...

Laser retroreflective sensor. Retroreflective sensor, flat design, M3 mounting, 1500 mm detection range, red light, dark on, PNP output, fixed cable, Very flat design for direct mounting without mounting bracket, DuraBeam Laser Sensors - durable and employable like an LED, Glare protected with polarization filter, Very bright, highly visible light spot. Effective detection range: 0 ... 1500 mm. Reflector distance: 60 ... 1500 mm. Threshold detection range: 1800 mm. Reference target: H40 reflector. Light source: LASER LIGHT. Light type: modulated visible red light , 680 nm. Polarization filter: yes. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length680 nmBeam divergence> 5 mradPulse lengthapprox. 3 µsRepetition rateapprox. 16.6 kHzmax. pulse energy8 nJ: . Note: LASER LIGHT , DO NOT STARE INTO BEAM. Laser class: 1. Wave length: 680 nm. Beam divergence: > 5 mrad. Pulse length: approx. 3 µs. Repetition rate: approx. 16.6 kHz. max. pulse energy: 8 nJ. Angle deviation: approx. 0.5 °. Object size: typ. starts from 1.5 mm. Diameter of the light spot: approx. 25 mm at a distance of 1500 mm. Opening angle: approx. 1 °. Optical face: frontal. Ambient light limit: EN 60947-5-2 : 30000 Lux. MTTFd: 800 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz). Function indicator: Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted. Operating voltage: 12 ... 24 V. No-load supply current: < 10 mA. Protection class: III. Switching type: NO contact / dark-on. Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collector. Switching voltage: max. 30 V DC. Switching current: max. 50 mA , resistive load. Voltage drop: ≤ 1.5 V DC. Switching frequency: approx. 2 kHz. Response time: 250 µs. Product standard: EN 60947-5-2. Laser safety: EN 60825-1:2007. UL approval: E87056 , cULus Recognized, Class 2 Power Source. CCC approval: CCC approval / marking not required for products rated ≤36 V. FDA approval: IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. Ambient temperature: -10 ... 60 °C (14 ... 140 °F). Storage temperature: -20 ... 70 °C (-4 ... 158 °F). Degree of protection: IP67. Connection: 2 m fixed cable. Material: . HousingPC (Polycarbonate) and Stainless steelOptical facePMMACablePUR: . Housing: PC (Polycarbonate) and Stainless steel. Optical face: PMMA. Cable: PUR. Mass: approx. 20 g. Tightening torque, fastening screws: 1 Nm. Dimensions: . Height25.5 mmWidth16 mmDepth4.1 mm: . Height: 25.5 mm. Width: 16 mm. Depth: 4.1 mm. Cable length: 2 m

Brand	Pepperl Fuchs
Lifecycle status	active