OBR7500-R100-E5F-IO

Retroreflective sensor. Retroreflective sensor with polarization filter, Miniature design with versatile mounting options, Extended temperature range<br>-40 °C ... 60 °C, High degree of protection IP6...

Retroreflective sensor. Retroreflective sensor with polarization filter, Miniature design with versatile mounting options, Extended temperature range<br>-40 °C ... 60 °C, High degree of protection IP69K, IO-Link interface for service and process data. Effective detection range: 0 ... 7.5 m. Reflector distance: 0.03 ... 7.5 m. Threshold detection range: 10 m. Reference target: H85-2 reflector. Light source: LED. Light type: modulated visible red light. LED risk group labelling: exempt group. Polarization filter: yes. Diameter of the light spot: approx. 65 mm at a distance of 1 m. Opening angle: 3.7 °. Ambient light limit: EN 60947-5-2. MTTFd: 724 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green:constantly on - power onflashing (4Hz) - short circuitflashing with short break (1 Hz) - IO-Link mode. Function indicator: Yellow LED:Permanently lit - light path clearPermanently off - object detectedFlashing (4 Hz) - insufficient operating reserve. Control elements: Light-on/dark-on changeover switch. Control elements: sensitivity adjustment. Parameterization indicator: IO link communication: green LED goes out briefly (1 Hz). Operating voltage: 10 ... 30 V DC. Ripple: max. 10 %. No-load supply current: < 25 mA at 24 V supply voltage. Protection class: III. Interface type: IO-Link ( via C/Q = pin 4 ). IO-Link revision: 1.1. Device ID: 0x110212 (1114642). Transfer rate: COM2 (38.4 kBit/s). Min. cycle time: 2.3 ms. Process data width: Process data input 2 BitProcess data output 2 Bit. SIO mode support: yes. Compatible master port type: A. Stability alarm output: 1 PNP, inactive when level falls below operating reserve after approx. 5 s.Immediately inactive if the beam is interrupted 4 times during the flashtime.. Switching type: The switching type of the sensor is adjustable. The default setting is: C/Q - BK: PNP normally open / dark-on, IO-Link Alarm output - WH: PNP normally closed. Signal output: 1 PNP, short-circuit protected, reverse polarity protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Usage category: DC-12 and DC-13. Voltage drop: ≤ 1.5 V DC. Switching frequency: 1000 Hz. Response time: 0.5 ms. Communication interface: IEC 61131-9. Product standard: EN 60947-5-2. UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1. Ambient temperature: -40 ... 60 °C (-40 ... 140 °F) , cable, fixed installation -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains. Storage temperature: -40 ... 70 °C (-40 ... 158 °F). Degree of protection: IP67 / IP69 / IP69K. Connection: 2 m fixed cable. Material: . HousingPC (Polycarbonate)Optical facePMMA: . Housing: PC (Polycarbonate). Optical face: PMMA. Mass: approx. 36 g. Dimensions: . Height37.1 mmWidth11 mmDepth21.5 mm: . Height: 37.1 mm. Width: 11 mm. Depth: 21.5 mm. Cable length: 2 m

Brand	Pepperl Fuchs
Lifecycle status	active