OMD60M-R2000-B23-V1V1D-T-1L

2-D LiDAR Sensor. R2000 UHD, 2-D LiDAR sensor for precise and highly dynamic positioning, measuring range to object up to 60 m, Ethernet, High operating range, Very high angle resolution, Infrared lig...

2-D LiDAR Sensor. R2000 UHD, 2-D LiDAR sensor for precise and highly dynamic positioning, measuring range to object up to 60 m, Ethernet, High operating range, Very high angle resolution, Infrared light, Deep-freeze applications, Measuring method PRT (Pulse Ranging Technology). Measuring range: 0.1 … 20 m (black 10 %)0.1 … 60 m (white 90 %)0.1 … 200 m (reflector) Min. reflectivity 1.8 %. Light source: laser diode. Light type: modulated infrared light. Laser nominal ratings: . NoteLASER RADIATION , DO NOT STARE INTO BEAMLaser class1Wave length905 nmBeam divergencetransversal 2 mrad , longitudinal 10 mradPulse length5 nsRepetition rate250 kHzmax. pulse energy< 94 nJ: . Note: LASER RADIATION , DO NOT STARE INTO BEAM. Laser class: 1. Wave length: 905 nm. Beam divergence: transversal 2 mrad , longitudinal 10 mrad. Pulse length: 5 ns. Repetition rate: 250 kHz. max. pulse energy: < 94 nJ. Measuring method: Pulse Ranging Technology (PRT). Scan rate: 10 ... 50 s-1. Scanning angle: 360°. Diameter of the light spot: 25 mm x 105 mm at 10 m. Filter: Maximum, average, median, reflectivity. Ambient light limit: 50000 Lux. Resolution: 1 mm. MTTFd: 75 a. Mission Time (TM): 10 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green. Data flow indicator: LED yellow: active ethernet LED green: Ethernet link. Function indicator: LED red: fault LED yellow: Q1 + Q2. Control elements: 2 Button. Parameterization indicator: 24 x 252 pixels , red. Operating voltage: 10 ... 30 V. Ripple: 10 % within the supply tolerance. No-load supply current: ≤ 400 mA / 24 V DC. Power consumption: < 10 W. Time delay before availability: < 40 s. Interface type: Fast Ethernet, 2 switching outputs. Protocol: HTTP , TCP/IP and UDP/IP. Input/output type: 2 Inputs/Outputs , Independently configurable , short circuit/reverse polarity protected. Switching threshold: low: Ua < 1 V,high: Ua > Ub - 2 V. Switching current: 100 mA per output. Product standard: EN 60947-5-2. Shock resistance: EN 60068-2-27. Vibration resistance: EN 60068-2-6. Laser safety: EN 60825-1:2014. Measuring speed: 250000 measurements per second. Measured value noise: typ. ± 12 mm (1 Sigma; max. 20 mm)with measured value filter deactivated. Angle resolution: 0.014 °. Absolute accuracy: < 0.5 m: typ. ± 40 mm> 0.5 m: typ. ± 30 mmReflector: typ. ± 40 mm. Repeat accuracy: < 12 mm. Protection class: III. UL approval: cULus Listed, Class 2 Power Source, Type 1 enclosure. CCC approval: CCC approval / marking not required for products rated ≤36 V. FDA approval: IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.. Ambient temperature: -30 ... 50 °C (-22 ... 122 °F). Storage temperature: -40 ... 70 °C (-40 ... 158 °F). Relative humidity: 95 % , no moisture condensation. Degree of protection: IP67. Connection: 4-pin, M12x1 connector, standard (supply) ,8-pin, M12x1 connector, A-coded (MultiPort) ,4-pin, M12x1 socket, D-coded (LAN). Material: . HousingABS + PC + AluminumOptical facePMMA: . Housing: ABS + PC + Aluminum. Optical face: PMMA. Mass: approx. 0.8 kg. Dimensions: . Height116.5 mmWidth106 mmLength106 mm: . Height: 116.5 mm. Width: 106 mm. Length: 106 mm

Brand	Pepperl Fuchs
Lifecycle status	active