OMR150M-R1000-SSI-V1V1B-T

Distance sensor. Distance sensor for positioning tasks accurate to the millimeter, PRT, measuring range up to 150 m, SSI/RS-422 interface, M12 plug, Version for low temperature applications, Switchabl...

Distance sensor. Distance sensor for positioning tasks accurate to the millimeter, PRT, measuring range up to 150 m, SSI/RS-422 interface, M12 plug, Version for low temperature applications, Switchable SSI/RS-422 interface, Maximum measurement accuracy, Red laser as the light emitter, Display and keypad for parameter settings. Measuring range: 0.3 ... 150 m. Reference target: REF-500MMx500MM (Foil reflector 500 mm x 500 mm) REF-250MMx250MM (Film reflector 250 mm x 250 mm) up to 75 m. Light source: laser diode. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length660 nmBeam divergence< 5 mradPulse length5 nsRepetition rate300 kHzmax. pulse energy< 2 nJ: . Note: LASER LIGHT , DO NOT STARE INTO BEAM. Laser class: 1. Wave length: 660 nm. Beam divergence: < 5 mrad. Pulse length: 5 ns. Repetition rate: 300 kHz. max. pulse energy: < 2 nJ. Measuring method: Pulse Ranging Technology (PRT). Max. Motion velocity: 15 m/s. Diameter of the light spot: < 75 cm at 150 m. Ambient light limit: > 80000 Lux. Resolution: 0.1 mm , adjustable. Temperature influence: 0.03 mm/K. MTTFd: > 100 a. Mission Time (TM): 10 a. Diagnostic Coverage (DC): 0 %. Function indicator: 6 LEDs. Control elements: Control panel (4 membrane keys) for setting parameters. Parameterization indicator: Illuminated display for displaying measured values and parameterization. Operating voltage: 10 ... 30 V DC. No-load supply current: 660 mA (18 V) ... 400 mA (30 V). Time delay before availability: < 1 s. Interface type: SSI. Monoflop time: 20 µs. Clock frequency: 0.1 ... 1 MHz. Interface type: RS-422. Read out rate: 4.8 ... 115.2 kBit/s. Input/output type: 2 inputs/outputs, independent configuration, short-circuit protected, reverse polarity protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Voltage drop: ≤ 1.5 V DC. Product standard: EN 60947-5-2. Laser safety: EN 60825-1:2014. Measured value output: 1 ms. Average data age: 3 ms , 6 ms , 12 ms , 25 ms , adjustable. Absolute accuracy: typ. ± 2.5 mm. Repeat accuracy: < 1 mm. Protection class: III (rated insulation voltage 50 V). UL approval: cULus Listed, Class 2 Power Source, Type 1 enclosure. FDA approval: IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.. Ambient temperature: -30 ... 60 °C (-22 ... 140 °F). Storage temperature: -40 ... 75 °C (-40 ... 167 °F). Relative humidity: 95 % , no moisture condensation. Degree of protection: IP67. Connection: 4-pin, M12x1 connector, A-coded (supply) ,5-pin, M12x1 connector, B-coded (SSI). Material: . HousingABS / PCOptical facePMMA , hard coated: . Housing: ABS / PC. Optical face: PMMA , hard coated. Mass: approx. 300 g. Dimensions: . Height106.6 mmWidth55 mmDepth80.6 mm: . Height: 106.6 mm. Width: 55 mm. Depth: 80.6 mm

Brand	Pepperl Fuchs
Lifecycle status	active