OMT50-R100-EP-IO-0,3M-V3-L

Distance sensor. Measurement to object, 50 mm detection range, red laser light, laser class 1, measured value via IO-Link, push-pull output, fixed cable with M8 plug, Miniature design with versatile m...

Distance sensor. Measurement to object, 50 mm detection range, red laser light, laser class 1, measured value via IO-Link, push-pull output, fixed cable with M8 plug, Miniature design with versatile mounting options, Space-saving distance sensors in small standardized design, Multi Pixel Technology (MPT) - exact and precise signal evaluation, DuraBeam Laser Sensors - durable and employable like an LED, IO-Link interface for service and process data. Measuring range: 20 ... 50 mm. Reference target: standard white, 100 mm x 100 mm. Light source: laser diode. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length680 nmBeam divergence> 5 mrad d63 d63 < 1 mm in the range of 50 mm ... 250 mmPulse length3 µsRepetition rateapprox. 3 kHzmax. pulse energy15.2 nJ: . Note: LASER LIGHT , DO NOT STARE INTO BEAM. Laser class: 1. Wave length: 680 nm. Beam divergence: > 5 mrad d63 d63 < 1 mm in the range of 50 mm ... 250 mm. Pulse length: 3 µs. Repetition rate: approx. 3 kHz. max. pulse energy: 15.2 nJ. Angle deviation: max. +/- 1.5 °. Diameter of the light spot: approx. 0.5 mm at a distance of 50 mm. Opening angle: approx. 0.6 °. Ambient light limit: EN 60947-5-2 : 30000 Lux. Resolution: 0.01 mm. MTTFd: 560 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green:constantly on - power onflashing (4Hz) - short circuitflashing with short break (1 Hz) - IO-Link mode. Function indicator: LED yellow:constantly on - switch output activeconstantly off - switch output inactive. Control elements: Teach-In key. Control elements: 5-step rotary switch for operating modes selection. Operating voltage: 10 ... 30 V DC. Ripple: max. 10 %. No-load supply current: < 25 mA at 24 V supply voltage. Protection class: III. Interface type: IO-Link ( via C/Q = pin 4 ). IO-Link revision: 1.1. Device profile: Smart Sensor. Device ID: 0x110902 (1116418). Transfer rate: COM2 (38.4 kBit/s). Min. cycle time: 3 ms. Process data width: Process data input 3 ByteProcess data output 2 Bit. SIO mode support: yes. Compatible master port type: A. Switching type: The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link. Signal output: 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Usage category: DC-12 and DC-13. Voltage drop: ≤ 1.5 V DC. Response time: 2 ms. Communication interface: IEC 61131-9. Product standard: EN 60947-5-2. Laser safety: EN 60825-1:2014. Temperature drift: 20 µm/K. Warm up time: 5 min. Repeat accuracy: ≤ 0.1 mm. Linearity error: ± 0.2 mm. UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1. FDA approval: IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.. Ambient temperature: 10 ... 60 °C (50 ... 140 °F). Storage temperature: -40 ... 70 °C (-40 ... 158 °F). Degree of protection: IP67 / IP69 / IP69K. Connection: 300 mm fixed cable with M8 x 1, 3-pin connector. Material: . HousingPC (Polycarbonate)Optical facePMMA: . Housing: PC (Polycarbonate). Optical face: PMMA. Mass: approx. 17 g. Dimensions: . Height44.5 mmWidth11 mmDepth21.5 mm: . Height: 44.5 mm. Width: 11 mm. Depth: 21.5 mm. Cable length: 0.3 m

Brand	Pepperl Fuchs
Lifecycle status	active