PS1000-A6-24.20
Power Supply. 100 V AC to 240 V AC wide-range input, Output 24 V DC, 20 A, 480 W, 1-phase, Housing width 48 mm, Efficiency up to 95.6 %, Minimal inrush current surge, DC OK relay contact, Current shar...
Power Supply. 100 V AC to 240 V AC wide-range input, Output 24 V DC, 20 A, 480 W, 1-phase, Housing width 48 mm, Efficiency up to 95.6 %, Minimal inrush current surge, DC OK relay contact, Current sharing for parallel use, Suitable for Zone 2/Div. 2 mounting, Device type: device for DIN rail mounting, Function: Standard, Rated voltage: 24 V DC, Voltage range: 24 ... 28 V DC <BR>factory setting: 24.1 V. Efficiency: 94.2 % at 120 V AC 95.6 % at 230 V AC. Power dissipation: 29.6 W at 120 V AC 22.1 W at 230 V AC. Voltage range: 100 ... 240 V AC (-15 %/+10 %), 50 ... 60 Hz (±6 %) 110 ... 150 V DC (±20 %). Current: 4.26 A at 120 V AC 2.23 A at 230 V AC 4.64 A at 110 V DC for lower output currents see technical information. Inrush current: 10 A peak at 120 V AC, temperature independent 4.5 A peak at 230 V AC, temperature independent. Capacity factor: 0.99 at 120 V AC 0.98 at 230 V AC. Rated voltage: 24 V DC. Voltage range: 24 ... 28 V DC factory setting: 24.1 V. Rated current: 20 A. Current: 24 ... 20.6 A at ambient temperature < 45 °C (113 °F) 20 ... 17.1 A at ambient temperature 60 °C (140 °F) 15 ... 13 A at ambient temperature 70 °C (158 °F) linear power derating see technical information. Power: 480 W. Ripple: max. 50 mV pp. Hold-up time: 32 ms at 120 V AC 32 ms at 230 V AC. Overload behavior: continuous current : output voltage > 13 V DC intermittent current : output voltage < 13 V DC. Short-circuit current: typ. 29 A intermitted current peak value for typ. 2 s. Voltage limitation: typ. 30.5 V DC max. 32 V DC. Connection: terminals 13, 14. Output type: relay contact DC OK - contact is closed if the output voltage is > 90 % of the adjusted output voltage. Contact loading: max. 60 V DC/0.3 A ; 30 V DC/1 A ; 30 V AC/0.5 A resistive load min. 1 mA at 5 V DC. Input/Output: SELV/PELV. Display elements: LED green: status DC OK - LED lights up if the output voltage is > 90 % of the adjusted output voltage. Control elements: potentiometer , plug-in jumper. Configuration: setting of the output voltage via potentiometer setting of the operating mode- plug-in jumper plugged in: "parallel use" operating mode- plug-in jumper not plugged in: "single use" operating mode. Electromagnetic compatibility: . Directive 2014/30/EUIEC/EN 61000-6-1 , IEC/EN 61000-6-2 , IEC/EN 61000-6-3 , IEC/EN 61000-6-4 , IEC/EN 61000-3-2 , IEC/EN 61000-3-3: . Directive 2014/30/EU: IEC/EN 61000-6-1 , IEC/EN 61000-6-2 , IEC/EN 61000-6-3 , IEC/EN 61000-6-4 , IEC/EN 61000-3-2 , IEC/EN 61000-3-3. Low voltage: . Directive 2014/35/EUEN 61010-1: . Directive 2014/35/EU: EN 61010-1. RoHS: . Directive 2011/65/EU (RoHS)IEC/EN 63000:2019: . Directive 2011/65/EU (RoHS): IEC/EN 63000:2019. Degree of protection: EN 60529. Shock resistance: EN 60068-2-27. Vibration resistance: EN 60068-2-6. Ambient temperature: -25 ... 70 °C (-13 ... 158 °F) , see technical information. Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Relative humidity: 5 ... 95 %, noncondensing. Shock resistance: 20 g , 11 ms or 30 g , 6 ms. Vibration resistance: 2 ... 17.8 Hz : ± 1.6 mm , 17.8 ... 500 Hz : 2 g. Corrosion resistance: IEC 60068-2-60, Method 4 ISA-71.04, severity level G3. Housing material: aluminum alloy , galvanized steel. Degree of protection: IP20. Connection: . Input/Outputscrew terminals conductor cross section: max. 6 mm2 (AWG 20-10) cable diameter: max. 2.8 mm, wire end ferrules included stripped insulation length: 7 mm tightening torque: max. 1 NmRelay contact outputspring terminals with push-in connection technology conductor cross section: max. 1.5 mm2 (AWG 24-16) cable diameter: max. 1.6 mm, wire end ferrules included stripped insulation length: 7 mm: . Input/Output: screw terminals conductor cross section: max. 6 mm2 (AWG 20-10) cable diameter: max. 2.8 mm, wire end ferrules included stripped insulation length: 7 mm tightening torque: max. 1 Nm. Relay contact output: spring terminals with push-in connection technology conductor cross section: max. 1.5 mm2 (AWG 24-16) cable diameter: max. 1.6 mm, wire end ferrules included stripped insulation length: 7 mm. Mass: approx. 830 g. Dimensions: 48 x 124 x 127 mm , without plugs and without DIN mounting rail. Height124 mmWidth48 mmDepth127 mm: . Height: 124 mm. Width: 48 mm. Depth: 127 mm. Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001. ATEX approval: . ATEX certificateEPS 17 ATEX 1 089 XATEX marking II 3G Ex ec nC II T4 Gc: . ATEX certificate: EPS 17 ATEX 1 089 X. ATEX marking: II 3G Ex ec nC II T4 Gc. Directive conformity: . Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-15:2010: . Directive 2014/34/EU: EN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-15:2010. UL approval: E350173 , E223176. IECEx approval: . IECEx certificateIECEx EPS 20.0056XIECEx markingEx ec nC IIC T4 GcStandardsIEC 60079-0:2011 , IEC 60079-7:2015 , IEC 60079-15:2010: . IECEx certificate: IECEx EPS 20.0056X. IECEx marking: Ex ec nC IIC T4 Gc. Standards: IEC 60079-0:2011 , IEC 60079-7:2015 , IEC 60079-15:2010. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
| Brand | Pepperl Fuchs |
| Lifecycle status | active |