Pepperl Fuchs

PS1000-A9-24.40

Power Supply. 380 V AC to 480 V AC wide-range inputs, Output 24 V DC, 40 A, 960 W, 3-phase, Housing width 110 mm, Efficiency up to 95.3 %, Minimal inrush current surge, Shutdown input, Remote control for ON/OFF, DC OK relay contact, Current sharing for parallel use, Device type: device for DIN rail mounting, Function: Standard, Rated voltage: 24 V DC, Voltage range: 24 ... 28 V DC <BR>factory setting: 24.1 V. Efficiency: 95.3 % at 3 x 400 V AC 95.2 % at 3 x 480 V AC. Power dissipation: 47.3 W at 3 x 400 V AC 48.4 W at 3 x 480 V AC. Voltage range: 3x 380 ... 480 V AC (-15 %/+20 %), 50 ... 60 Hz (±6 %). Current: 1.65 A at 3 x 400 V AC 1.35 A at 3 x 480 V AC for lower output currents see technical information. Inrush current: 4.5 A peak at 3 x 400 V AC, temperature-independent 4.5 A peak at 3 x 480 V AC , temperature-independent. Capacity factor: 0.88 at 3 x 400 V AC 0.9 at 3 x 480 V AC. Remote control: terminals 15, 16 remote control for ON/OFF and shutdown input. Rated voltage: 24 V DC. Voltage range: 24 ... 28 V DC factory setting: 24.1 V. Rated current: 40 A. Current: continuous: 40 ... 34.3 A short-term up to 4 s: 60 ... 51.5 A linear power derating see technical information. Power: 960 W. Ripple: max. 100 mV pp. Hold-up time: 25 ms at 3 x 400 V AC 25 ms at 3 x 480 V AC. Overload behavior: constant current mode. Short-circuit current: typ. 46 A continuous, load impedance < 10 mΩ. Voltage limitation: typ. 30.5 V DC max. 32 V DC. Connection: terminals 13, 14. Output type: relay contact DC OK - contact is closed if the output voltage is > 90 % of the adjusted output voltage. Contact loading: max. 60 V DC/0.3 A ; 30 V DC/1 A ; 30 V AC/0.5 A resistive load min. 1 mA at 5 V DC. Input/Output: SELV/PELV. Display elements: LED green: status DC OK - LED lights up if the output voltage is > 90 % of the adjusted output voltage LED red: overload - LED lights up if the output voltage is < 90 % of the adjusted output voltage or in case of short circuit - flashes if the shutdown has been activated or if the device has shut down due to overtemperature. Control elements: potentiometer , plug-in jumper. Configuration: setting of the output voltage via potentiometer setting of the operating mode- plug-in jumper plugged in: "parallel use" operating mode- plug-in jumper not plugged in: "single use" operating mode setting of the shutdown input:- plug-in jumper plugged in: device switches off. Electromagnetic compatibility: . Directive 2014/30/EUIEC/EN 61000-6-1 , IEC/EN 61000-6-2 , IEC/EN 61000-6-3 , IEC/EN 61000-6-4 , IEC/EN 61000-3-2 , IEC/EN 61000-3-3: . Directive 2014/30/EU: IEC/EN 61000-6-1 , IEC/EN 61000-6-2 , IEC/EN 61000-6-3 , IEC/EN 61000-6-4 , IEC/EN 61000-3-2 , IEC/EN 61000-3-3. Low voltage: . Directive 2014/35/EUEN 61010-1: . Directive 2014/35/EU: EN 61010-1. RoHS: . Directive 2011/65/EU (RoHS)IEC/EN 63000:2019: . Directive 2011/65/EU (RoHS): IEC/EN 63000:2019. Degree of protection: EN 60529. Shock resistance: EN 60068-2-27. Vibration resistance: EN 60068-2-6. Ambient temperature: -25 ... 70 °C (-13 ... 158 °F) , see technical information. Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Relative humidity: 5 ... 95 %, noncondensing. Shock resistance: 15 g , 6 ms or 10 g , 11 ms. Vibration resistance: 2 ... 17.8 Hz : ± 1.6 mm , 17.8 ... 500 Hz : 1 g. Housing material: aluminum alloy , galvanized steel. Degree of protection: IP20. Connection: . Inputscrew terminals conductor cross section: max. 6 mm2 (AWG 20-10) cable diameter: max. 2.8 mm, wire end ferrules included stripped insulation length: 7 mm tightening torque: max. 1 NmOutputscrew terminals conductor cross section: max. 16 mm2 (AWG 22-8) cable diameter: max. 5.2 mm, wire end ferrules included stripped insulation length: 12 mm tightening torque: max. 2.3 NmRelay contact outputspring terminals conductor cross section: max. 1.5 mm2 (AWG 24-16) cable diameter: max. 1.6 mm, wire end ferrules included stripped insulation length: 7 mmRemote control/shutdown inputspring terminals conductor cross section: max. 1.5 mm2 (AWG 24-16) cable diameter: max. 1.6 mm, wire end ferrules included stripped insulation length: 7 mm: . Input: screw terminals conductor cross section: max. 6 mm2 (AWG 20-10) cable diameter: max. 2.8 mm, wire end ferrules included stripped insulation length: 7 mm tightening torque: max. 1 Nm. Output: screw terminals conductor cross section: max. 16 mm2 (AWG 22-8) cable diameter: max. 5.2 mm, wire end ferrules included stripped insulation length: 12 mm tightening torque: max. 2.3 Nm. Relay contact output: spring terminals conductor cross section: max. 1.5 mm2 (AWG 24-16) cable diameter: max. 1.6 mm, wire end ferrules included stripped insulation length: 7 mm. Remote control/shutdown input: spring terminals conductor cross section: max. 1.5 mm2 (AWG 24-16) cable diameter: max. 1.6 mm, wire end ferrules included stripped insulation length: 7 mm. Mass: approx. 1500 g. Dimensions: 110 x 124 x 127 mm (W x H x D) , without DIN mounting rail. Height124 mmWidth110 mmDepth127 mm: . Height: 124 mm. Width: 110 mm. Depth: 127 mm. Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001. UL approval: E223176. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Brand	Pepperl Fuchs
Lifecycle status	active

Not currently in stock

Price on request

Request sourcing Ask a question