R2-SP-IC*

Segment Protector. Segment protector, junction box for fieldbus with short-circuit and fault protection, field junction box, electronic component for control cabinet installation, 4 ... 12 outputs Ex...

Segment Protector. Segment protector, junction box for fieldbus with short-circuit and fault protection, field junction box, electronic component for control cabinet installation, 4 ... 12 outputs Ex ic (FISCO or Entity) or non-incendive (Div 2), Advanced fault isolation at the spur, Segment Protector in Zone 2/Div. 2, Instruments in Zone 2/Div. 2 or Zone 1/Div. 1, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada. Design / Mounting: Cabinet installation. Installation in hazardous area: Zone 2 / Div. 2. Main cable (Trunk): . Rated voltage9 ... 31 V DC10.5 V DC minimum input voltage acc. to FF-846Rated currentmax. 4.5 A: . Rated voltage: 9 ... 31 V DC10.5 V DC minimum input voltage acc. to FF-846. Rated current: max. 4.5 A. Outputs: . Number of outputssee table "Technical data depending on model"Number of devices per output1Rated voltagemax. 31 VRated currentmax. 32 mA switch 1, position 1 max. 43 mA switch 1, position 2Short-circuit current46 mA switch 1, position 1 57 mA switch 1, position 2: . Number of outputs: see table "Technical data depending on model". Number of devices per output: 1. Rated voltage: max. 31 V. Rated current: max. 32 mA switch 1, position 1 max. 43 mA switch 1, position 2. Short-circuit current: 46 mA switch 1, position 1 57 mA switch 1, position 2. Self current consumption: see table "Technical data depending on model". Voltage drop main cable/outputs: max. 1.2 V. Voltage drop trunk In/Out: 0 V. Terminating resistor: external type M-FT 100 Ω +/- 10 %. Surge protection: Trunk overvoltage protection if voltage exceeds typ. 39 V, max. 41 V. Switch: configuration of short-circuit current/rated current. LED PWR: green: Fieldbus voltage > 10 V and fieldbus terminator is deactivated. LED COM/ERR: yellow: flashing: fieldbus communication status and physical layer diagnostic status. LED SPURS: red: 2 Hz flashing in short-circuit condition. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013: . Directive 2014/30/EU: EN 61326-1:2013. Electromagnetic compatibility: NE 21:2011. Degree of protection: IEC 60529. Fieldbus standard: IEC 61158-2. Climatic conditions: IEC 60721. Shock resistance: EN 60068-2-27. Vibration resistance: EN 60068-2-6. Ambient temperature: -50 ... 70 °C (-58 ... 158 °F). Storage temperature: -50 ... 85 °C (-58 ... 185 °F). Relative humidity: < 95 % non-condensing. Shock resistance: 15 g 11 ms. Vibration resistance: 1 g , 10 ... 150 Hz. Corrosion resistance: acc. to ISA-S71.04-1985, severity level G3. Connection type: screw terminal , pluggable or spring terminal , pluggable. Core cross section: see table 2. Housing material: Polycarbonate. Degree of protection: IP20. Mass: see table "Technical data depending on model". Dimensions: see table "Technical data depending on model". Mounting: DIN rail mounting. EU-type examination certificate: TÜV 12 ATEX 098651 X. Marking II 3G Ex nA [ic] IIC T4 Gc [exsign] II (3)D [Ex ic Dc] IIIC: . Marking: II 3G Ex nA [ic] IIC T4 Gc [exsign] II (3)D [Ex ic Dc] IIIC. Supply: . Maximum safe voltageUm35 V: Um. Maximum safe voltage: 35 V. Outputs: . VoltageUo32 VCurrentIo46 mA switch 1, position 1 65 mA switch 1, position 2InductanceLo0.125 mH switch 1, position 1 0.25 mH switch 1, position 2CapacitanceCo60 nF: Uo. Voltage: 32 V. Current: 46 mA switch 1, position 1 65 mA switch 1, position 2. Inductance: 0.125 mH switch 1, position 1 0.25 mH switch 1, position 2. Capacitance: 60 nF. Directive conformity: . Directive 2014/34/EUEN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010: . Directive 2014/34/EU: EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010. UL approval: E106378. Control drawing116-0406Approved forClass I, Division 2, Groups A, B, C, D: . Control drawing: 116-0406. Approved for: Class I, Division 2, Groups A, B, C, D. IECEx approval: . IECEx certificateIECEx TUN 12.0015XIECEx markingEx nA [ic] IIC T4 Gc [Ex ic Dc] IIIC: . IECEx certificate: IECEx TUN 12.0015X. IECEx marking: Ex nA [ic] IIC T4 Gc [Ex ic Dc] IIIC. Supplementary information: Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Brand	Pepperl Fuchs
Lifecycle status	active