RL28-8-H-1500-LAS/47/115b

Background suppression sensor. Background suppression sensor, Universal series with highly versatile fields of use, Resistant against noise: reliable operation under all conditions, Laser version for...

Background suppression sensor. Background suppression sensor, Universal series with highly versatile fields of use, Resistant against noise: reliable operation under all conditions, Laser version for long ranges, Small light beam diameter for detection of small parts. Detection range: 100 ... 1500 mm. Detection range min.: 50 ... 200 mm. Detection range max.: 100 ... 1500 mm. Background suppression: max. + 10 % of the upper limit of the detection range. Light source: laser diode. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length650 nmBeam divergence< 1.5 mradPulse length4.5 µsRepetition rateapprox. 1.5 kHzmax. pulse energy17 nJ: . Note: LASER LIGHT , DO NOT STARE INTO BEAM. Laser class: 1. Wave length: 650 nm. Beam divergence: < 1.5 mrad. Pulse length: 4.5 µs. Repetition rate: approx. 1.5 kHz. max. pulse energy: 17 nJ. Light spot representation: max. 1.5 mm x 4 mm , light spot perpendicular to housing. Black-white difference (6 %/90 %): ≤ 40 %. Ambient light limit: 50000 Lux. MTTFd: 590 a. Mission Time (TM): 10 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green. Function indicator: 2 LEDs yellowON: object inside the scanning rangeOFF: object outside the scanning range. Control elements: Sensing range adjuster , Light-on/dark-on changeover switch. Operating voltage: 10 ... 30 V DC. Ripple: 10 %. No-load supply current: ≤ 40 mA. Protection class: II, rated insulation voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1. Time delay before availability: ≤ 2 s. Switching type: light/dark on, switchable. Signal output: 2 PNP outputs, complementary, short-circuit protected, reverse polarity protected, open collector. Switching voltage: max. 30 V DC. Switching current: max. 200 mA. Switching frequency: 140 Hz. Response time: 3.5 ms. Product standard: EN 60947-5-2. Laser safety: IEC 60825-1:2014. UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1. FDA approval: IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.. Ambient temperature: -10 ... 50 °C (14 ... 122 °F). Storage temperature: -40 ... 60 °C (-40 ... 140 °F). Degree of protection: IP67. Connection: 0.2 m fixed cable with 4-pin, M12 connector. Material: . HousingPlastic ABSOptical facePlastic pane: . Housing: Plastic ABS. Optical face: Plastic pane. Mass: approx. 70 g. Dimensions: . Height88 mmWidth25.8 mmDepth54.3 mm: . Height: 88 mm. Width: 25.8 mm. Depth: 54.3 mm

Brand	Pepperl Fuchs
Lifecycle status	active