VBA-2E1A-G10-ZAL/E2L-P1

AS-Interface sensor/actuator module. G10 ultra compact module, 2 inputs and 1 output. Node type: A/B node. AS-Interface specification: V3.0. Required gateway specification: ≥ V2.1. Profile: S-7.A.E. I...

AS-Interface sensor/actuator module. G10 ultra compact module, 2 inputs and 1 output. Node type: A/B node. AS-Interface specification: V3.0. Required gateway specification: ≥ V2.1. Profile: S-7.A.E. IO code7ID codeAID1 code7ID2 codeE: . IO code: 7. ID code: A. ID1 code: 7. ID2 code: E. UL File Number: E223772 "For use in NFPA 79 Applications only". LED FAULT: error display; LED redred: communication error or address is 0red flashing: overload of sensor power supply or overload of outputs or external auxiliary voltage UAUX missing. LED AS-i: AS-Interface voltage; LED green. LED IN: switching state (input); 2 LED yellow. LED OUT: Switching state (output); LED yellow. Auxiliary voltage: 20 ... 30 V DC PELV. Rated operating voltage: 18.5 ... 31.6 V from AS-Interface. Rated operating current: ≤ 40 mA. Protection class: III. Surge protection: UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV). Number/Type: 2 inputs for 2- or 3-wire sensors (PNP), DC option 1 input for 4-wire sensor (PNP), DC. Supply: from external auxiliary voltage UAUX. Voltage: 20 ... 30 V. Current loading capacity: ≤ 1000 mA overload and short-circuit resistant. Input current: ≤ 9 mA (limited internally). Switching point: according to DIN EN 61131-2 (Type 2). 0 (unattenuated)≤ 3 mA1 (attenuated)≥ 5 mA: . 0 (unattenuated): ≤ 3 mA. 1 (attenuated): ≥ 5 mA. Signal delay: < 1 ms (input/AS-Interface). Number/Type: 1 electronic output, PNP,. Supply: from external auxiliary voltage UAUX. Voltage: ≥ (UAUX - 0.5 V). Current loading capacity: ≤ 1000 mA overload and short-circuit resistant. Electromagnetic compatibility: . Directive 2014/30/EUEN 62026-2:2013: . Directive 2014/30/EU: EN 62026-2:2013. Degree of protection: EN 60529:2000. Fieldbus standard: EN 62026-2:2013. Input: EN 61131-2:2007. Emitted interference: EN 61000-6-4:2011. AS-Interface: EN 62026-2:2013. Noise immunity: EN 61000-6-2:2005 , EN 62026-2:2013. UL approval: cULus Listed, Type 1 enclosure. Maximum permissible ambient temperaturemax. 65 °C (max. 149 °F): . Maximum permissible ambient temperature: max. 65 °C (max. 149 °F). Ambient temperature: -25 ... 70 °C (-13 ... 158 °F). Storage temperature: -25 ... 85 °C (-13 ... 185 °F). Shock and impact resistance: 30 g, 11 ms in 6 spatial directions 3 shocks10 g, 16 ms in 6 spatial directions 1000 shocks. Vibration resistance: 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles. Degree of protection: IP67 IP67 / IP68 / IP69K with flat cable VAZ-FK-S-*. Connection: AS-Interface/UAUX: AS-Interface flat cable In-/outputs & matching connector: M8 round connector, 4-pin, A-coded, according to IEC 61076-2-104. Material: . ContactsCuSn / AuHousingPBT PCBodyPUR, blackCablePURMounting screwStainless steel 1.4305 / AISI 303: . Contacts: CuSn / Au. Housing: PBT PC. Body: PUR, black. Cable: PUR. Mounting screw: Stainless steel 1.4305 / AISI 303. Cable: . Sheath diameter∅4,3 mmColorblackCores4 x 0.34 mm2LengthL0.35 m: . Sheath diameter: ∅4,3 mm. Color: black. Cores: 4 x 0.34 mm2. Length: 0.35 m. Mass: 100 g. Tightening torque, fastening screws: 1.65 Nm. Tightening torque, cable gland: 0.4 Nm. Dimensions: . Height21.5 mmWidth27.7 mmLength40.5 mm: . Height: 21.5 mm. Width: 27.7 mm. Length: 40.5 mm

Brand	Pepperl Fuchs
Lifecycle status	active