VBA-4E2A-KE1-Z/E2

AS-Interface sensor/actuator module. KE1 switch cabinet module<br>4 inputs and 2 outputs. Node type: A/B node. AS-Interface specification: V2.1. Required gateway specification: ≥ V2.1. Profile: S-7.A....

AS-Interface sensor/actuator module. KE1 switch cabinet module<br>4 inputs and 2 outputs. Node type: A/B node. AS-Interface specification: V2.1. Required gateway specification: ≥ V2.1. Profile: S-7.A.0. IO code7ID codeAID1 code7ID2 code0: . IO code: 7. ID code: A. ID1 code: 7. ID2 code: 0. UL File Number: E223772. LED FAULT: error display; LED redred: communication error or address is 0red flashing: overload of outputs. LED PWR: AS-Interface voltage; LED green. LED AUX: ext. auxiliary voltage UAUX ; LED green. LED IN: switching state (input); 4 LED yellow. LED OUT: Switching state (output); 2 LED yellow. Auxiliary voltage (output): 20 ... 30 V DC PELV. Rated operating voltage: 26.5 ... 31.6 V from AS-Interface. Rated operating current: ≤ 25 mA (without sensors) / max. 60 mA. Protection class: III. Surge protection: UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV). Number/Type: 4 inputs for 2-wire sensors (PNP), DC or for mechanical contacts. Supply: from AS-Interface. Input current: ≤ 8 mA (limited internally). Switching point: according to DIN EN 61131-2 (Type 2). 0 (unattenuated)≤ 2 mA1 (attenuated)≥ 4 mA: . 0 (unattenuated): ≤ 2 mA. 1 (attenuated): ≥ 4 mA. Signal delay: < 2 ms (input/AS-Interface). Signal frequency: ≤ 250 Hz. Number/Type: 2 electronic outputs, PNP, overload and short-circuit proof. Supply: from external auxiliary voltage UAUX. Voltage: ≥ (UAUX - 0.5 V). Current: O1/O2 max. 1.5 A, total 3 A (TB ≤ 40 °C)O1/O2 max. 1 A, total 2 A (TB ≤ 70 °C). Usage category: DC-13. Electromagnetic compatibility: . Directive 2014/30/EUEN 62026-2:2013 EN 61000-6-2:2001 EN 61000-6-4:2001: . Directive 2014/30/EU: EN 62026-2:2013 EN 61000-6-2:2001 EN 61000-6-4:2001. Degree of protection: EN 60529:2000. Input: EN 61131-2:2007. Emitted interference: EN 61000-6-4:2001. AS-Interface: EN 62026-2:2013. Noise immunity: EN 61000-6-2:2001. Ambient temperature: -25 ... 70 °C (-13 ... 158 °F). Storage temperature: -25 ... 85 °C (-13 ... 185 °F). Relative humidity: 90 % , noncondensing. Pollution degree: 2. Degree of protection: IP20. Connection: removable terminalsrated connection capacity:rigid/flexible (with and without wire-end ferrules): 0.25 mm2 ... 2.5 mm2for multiple-wire connection with two wires of equal cross-section:flexible with twin wire-end ferrules: 0.5 mm2 ... 1.5 mm2. Material: . HousingPA 66-FR: . Housing: PA 66-FR. Mass: 80 g. Dimensions: . Height48.5 mmWidth22.5 mmLength99.6 mm: . Height: 48.5 mm. Width: 22.5 mm. Length: 99.6 mm. Mounting: DIN mounting rail

Brand	Pepperl Fuchs
Lifecycle status	active