VIM32PL-E1V64-0RE-I421V14

Vibration sensor. Vibration sensor with switching output and analog current output, Series: Performance Line, Measured variable: Vibration velocity, Output type: analog output, current <BR>output of t...

Vibration sensor. Vibration sensor with switching output and analog current output, Series: Performance Line, Measured variable: Vibration velocity, Output type: analog output, current <BR>output of the vibration variable, Output type: PNP, Ordinary Location: E468231 cULus Listed, Class III Power Source and limited energy , if UL marking is marked on the product. For use in NFPA 70 Applications only. <BR>adapters providing field wiring on request, Adaption: M8 x 1.25 external thread <br>, Connection type: plug. Type: Vibration sensor. Measuring technology: MEMS. Series: Performance Line. Measured variable: Vibration velocity. Measuring range: . Vibration velocityv-rms0 ... 64 mm/s: v-rms. Vibration velocity: 0 ... 64 mm/s. Measurement accuracy: ± 0.1 mm/s (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954 for measuring range greater than 8 mm/s. Cross-sensitivity: < 5 % of the partial lateral acceleration, which acts exactly 90° to the measuring axis. Frequency range: 10 ... 1000 Hz. Averaging time: for v-rms: 2 s. MTTFd: 329 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Fusing: external fuse is required: 1 A , fast acting , 30 V DC. Operating voltage: 18 ... 30 V DC. Current consumption: max. 220 mA. Power consumption: max. 6.6 W. Time delay before availability: 2 s (rms filter is calculated intially with measurement data before they are available at the output). Surge protection: up to 2 kV. Output type: analog output, current output of the vibration variable. Output current: 4 ... 20 mA. Load resistor: ≤ 500 Ω. Output type: PNP. Switching function: Normally closed (NC). Operating current: ≤ 100 mA. Voltage drop: < 2 V. Switching threshold: 6.4 mm/s ( 10 % of the measuring range ). Preset response time: 2 s (minimum time for a vibration event above the switching threshold so that the output switches). Short-circuit protection: yes. Degree of protection: DIN EN 60529, IP66, IP67. Shock resistance: DIN EN 60068-2-27, 60 g, 6 ms. Vibration resistance: DIN EN 60068-2-6, 16.5 g, 10 ... 1000 Hz. Vibration evaluation: DIN ISO 10816/20816. UL approval: . Ordinary LocationE468231 cULus Listed, Class III Power Source and limited energy , if UL marking is marked on the product. For use in NFPA 70 Applications only. adapters providing field wiring on requestMaximum permissible ambient temperaturemax. 80 °C (max. 176 °F): . Ordinary Location: E468231 cULus Listed, Class III Power Source and limited energy , if UL marking is marked on the product. For use in NFPA 70 Applications only. adapters providing field wiring on request. Maximum permissible ambient temperature: max. 80 °C (max. 176 °F). Ambient temperature: -40 ... 85 °C (-40 ... 185 °F). Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Connection type: plug. Housing material: Stainless steel 1.4305 / AISI 303. Degree of protection: IP66 / IP67 only in connected state. Connector: . ThreadingM12Number of pins4: . Threading: M12. Number of pins: 4. Mass: approx. 100 g. Dimensions: . Length72.5 mmDiameter23.8 mm: . Length: 72.5 mm. Diameter: 23.8 mm

Brand	Pepperl Fuchs
Lifecycle status	active