VS18/VSE18-M-LAS/40a/76a/118

Thru-beam sensor. Thru-beam sensor, M18 threaded housing design, nickel-coated brass housing, 60 m detection range, laser light, sensitivity adjuster, light/dark on, DC version, push-pull output, M12...

Thru-beam sensor. Thru-beam sensor, M18 threaded housing design, nickel-coated brass housing, 60 m detection range, laser light, sensitivity adjuster, light/dark on, DC version, push-pull output, M12 plug, M18 threaded housing made of brass, nickel plated, Detection of very small parts in the near range, Visible red light, pulsed LASER light, Focusable optical system, Array control panel with highly visible LED display. Emitter: VS18-M-LAS/76a/118. Receiver: VSE18-M-LAS/40a/118/128. Effective detection range: 0 ... 60 m. Threshold detection range: 85 m. Light source: laser diode. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length655 nmBeam divergence11.7 mradPulse length2 µsRepetition rate50 kHzmax. pulse energy2.55 nJ: . Note: LASER LIGHT , DO NOT STARE INTO BEAM. Laser class: 1. Wave length: 655 nm. Beam divergence: 11.7 mrad. Pulse length: 2 µs. Repetition rate: 50 kHz. max. pulse energy: 2.55 nJ. Diameter of the light spot: 100 mm x 100 mm at a distance of 85 m. Opening angle: adjustable focal point. Optical face: frontal. Ambient light limit: 30000 Lux. Hysteresis: < 15 %. MTTFd: 520 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 90 %. Operation indicator: LED green, flashes in case of short-circuit. Function indicator: LED yellow, light with free light beam , flashes when falling short of the operating reserve , OFF when light beam is interrupted (in receiver). Control elements: Sensitivity adjuster, light/dark switch (receiver). Operating voltage: 10 ... 30 V DC , class 2. No-load supply current: Emitter: 20 mA , Receiver: 15 mA. Protection class: II , rated voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1. Test input: emitter deactivation at +UB. Switching type: light/dark on, switchable. Signal output: Push-pull (4 in 1) output short-circuit protected overvoltage protected. Switching voltage: 30 V DC. Switching current: max. 200 mA. Voltage drop: ≤ 2.5 V DC. Switching frequency: 5000 Hz. Response time: 100 µs. Product standard: EN 60947-5-2. Standard conformity: . Laser classIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007: . Laser class: IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. EAC conformity: TR CU 020/2011. UL approval: cULus Listed, Type 1 enclosure. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -25 ... 55 °C (-13 ... 131 °F). Storage temperature: -30 ... 70 °C (-22 ... 158 °F). Shock resistance: b < 30 g, T < 11 ms. Degree of protection: IP67. Connection: 4-pin, M12 x 1 connector. Material: . Housingbrass, nickel-platedOptical faceplastic: . Housing: brass, nickel-plated. Optical face: plastic. Mass: 60 g (device). Dimensions: . Length65 mmDiameter18 mm: . Length: 65 mm. Diameter: 18 mm

Brand	Pepperl Fuchs
Lifecycle status	active