235-711

PCB terminal block, 235 Series, grayConnect conductors quickly and easily with this PCB terminal block (item number 235-711). It is ideal for custom installations with different mounting types. Our PC...

<h2>PCB terminal block, 235 Series, gray</h2><br/><br/>Connect conductors quickly and easily with this PCB terminal block (item number 235-711). It is ideal for custom installations with different mounting types. Our PCB terminal block is rated for 320 V and is designed to handle a rated current of up to 10 A. Strip lengths must be between 9 mm and 10 mm when connecting conductors to this PCB terminal block. Featuring one conductor terminal along with PUSH WIRE®, this connector outperforms the competition. Our trusted PUSH WIRE® connection offers the fastest method for clamping conductors. It utilizes the conductor's stiffness to overcome the clamping spring's contact force. The item's dimensions are 6.5 x 12.8 x 12.5 mm (width x height x depth). Depending on the conductor type, this PCB terminal block is ideal for conductor cross sections ranging from 0.25 mm² to 0.75 mm². Up to one potential / one pole can be connected to this terminal block using two clamping points on one level. The gray housing is made of polyamide (PA66) for insulation, the clamping spring is made of chrome-nickel spring steel (CrNi), and the contacts are made of electrolytic copper (ECu). Tin is used for coating the contact surfaces. This PCB terminal block is operated with an operating tool. The PCB terminal block is designed for THT soldering. The conductor is designed to be inserted into the board at an angle of 0°.. The solder pins, which are 0.8 x 0.4 mm in cross-section and 3.6 mm long, are set out within the terminal block (in-line). There are two solder pins per potential.<br/>