250-1404

PCB terminal block, 250 Series, push-buttonThis PCB terminal block (item number 250-1404) is designed for quick and simple connections. You can count on trusted safety with these PCB terminal blocks,...

<h2>PCB terminal block, 250 Series, push-button</h2><br/><br/>This PCB terminal block (item number 250-1404) is designed for quick and simple connections. You can count on trusted safety with these PCB terminal blocks, perfect for a wide variety of applications when designing your devices. Our PCB terminal block is rated for 160 V and is designed to handle a rated current of up to 4 A. Conductors should only be connected to this PCB terminal block if their strip length is between 8.5 mm and 9.5 mm. This product incorporates one conductor terminal and utilizes Push-in CAGE CLAMP®. Push-in CAGE CLAMP® technology provides a universal connection solution for all conductor types. It allows both solid and fine-stranded conductors with ferrules to be inserted directly into the clamping point without the need for tools. The dimensions are 11.66 x 16.7 x 12 mm (width x height x depth). This PCB terminal block is suitable for conductor cross sections ranging from 0.14 mm² to 0.5 mm². Up to four potentials / four poles can be connected to this terminal strip using four clamping points on one level. The clamping spring is made of a Copper alloy and the gray housing is made of polyamide (PA66) for insulation. The contact surface is coated with tin. A push-button is used to operate this PCB terminal block. THT is used to solder the PCB terminal block. The conductor is designed to be inserted at a 45° angle.. The solder pins, which are 0.4 x 0.75 mm in cross-section and 3.6 mm long, are arranged over the entire terminal strip (staggered). There are one solder pin per potential.<br/>