250-207/353-604/997-406

PCB terminal block, 250 Series, push-buttonConnect conductors quickly and securely with this PCB terminal block (item number 250-207/353-604/997-406). It is a universal connector that can be used prac...

<h2>PCB terminal block, 250 Series, push-button</h2><br/><br/>Connect conductors quickly and securely with this PCB terminal block (item number 250-207/353-604/997-406). It is a universal connector that can be used practically anywhere, e.g., as a pluggable PCB connector, panel feedthrough header, connector for rail-mount terminal blocks, or a floating connector for different mounting methods. Rated current and voltage are key factors to consider when choosing a PCB terminal block, as they determine the product's suitability for different applications. This product has a rated voltage of 320 V and a rated current of 8 A. Conductors should only be connected to this PCB terminal block if their strip length is between 8.5 mm and 9.5 mm. This product incorporates one conductor terminal and utilizes Push-in CAGE CLAMP®. Our Push-in CAGE CLAMP® is a universal, maintenance-free connection solution for all conductor types, boasting a key feature: both solid and fine-stranded conductors with ferrules can be directly inserted without the need for tools or any preparation, such as crimping the ferrule. The item's dimensions are 26 x 15.5 x 12 mm (width x height x depth). Depending on the type of conductor, this PCB terminal block is designed for conductor cross sections ranging from 0.2 mm² to 1.5 mm². Up to seven potentials / seven poles can be connected to this terminal strip using seven clamping points on one level. The clamping spring is made of a Copper alloy and the black housing is made of polyamide (PA46) for insulation. Tin is used for coating the contact surfaces. This PCB terminal block is operated with a push-button. THR is used to assemble the PCB terminal block. The conductor is designed to be inserted into the board at an angle of 45°.. The solder pins are organized over the entire terminal strip (staggered). They are 0.4 x 0.75 mm cross-section and 2.4 mm in length. Each potential has one solder pin.<br/>