250-212/000-012

PCB terminal block, 250 Series, Push-in CAGE CLAMP®Connect conductors quickly and safely with this PCB terminal block (item number 250-212/000-012). It offers the flexibility needed for different moun...

<h2>PCB terminal block, 250 Series, Push-in CAGE CLAMP®</h2><br/><br/>Connect conductors quickly and safely with this PCB terminal block (item number 250-212/000-012). It offers the flexibility needed for different mounting types. Our PCB terminal block is rated for 320 V and is designed for use with a rated current of up to 8 A. Conductors should only be connected to this PCB terminal block if their strip length is between 8.5 mm and 9.5 mm. Featuring one conductor terminal along with Push-in CAGE CLAMP®, this connector delivers reliable performance. Push-in CAGE CLAMP® technology provides a universal connection solution for all conductor types. It allows both solid and fine-stranded conductors with ferrules to be inserted directly into the clamping point without the need for tools. The dimensions are 43.5 x 16.7 x 12 mm (width x height x depth). Depending on the conductor type, this PCB terminal block is suitable for conductor cross sections ranging from 0.2 mm² to 1.5 mm². Up to twelve potentials / twelve poles can be connected to this terminal strip using twelve clamping points on one level. The orange housing is made of polyamide (PA66) for insulation and the clamping spring is made of a Copper alloy. The contact surface is coated with tin. This PCB terminal block is operated with a push-button. The PCB terminal block is designed for THT soldering. Insert the conductor into the board at a 45° angle.. The solder pins, which are 0.4 x 0.75 mm in cross-section and 3.4 mm long, are laid out over the entire terminal strip (staggered). There are one solder pin per potential.<br/>