250-709

PCB terminal block, 250 Series, with 5 mm pin spacingOur PCB terminal block (item number 250-709) is designed for seamless electrical installations. It is ideal for custom installations with different...

<h2>PCB terminal block, 250 Series, with 5 mm pin spacing</h2><br/><br/>Our PCB terminal block (item number 250-709) is designed for seamless electrical installations. It is ideal for custom installations with different mounting types. Our PCB terminal block is rated for 400 V and is designed to handle a rated current of up to 10 A. Conductors should only be connected to this PCB terminal block if their strip length is 9 mm. This product incorporates one conductor terminal and utilizes Push-in CAGE CLAMP®. Our Push-in CAGE CLAMP® is a universal, maintenance-free connection solution for all conductor types, offering a key advantage: both solid and fine-stranded conductors with ferrules can be directly inserted without the need for tools or any preparation, such as crimping the ferrule. The dimensions are 46.2 x 24.9 x 21.7 mm (width x height x depth). This PCB terminal block is suitable for conductor cross sections ranging from 0.5 mm² to 1.5 mm². Up to eighteen potentials / eighteen poles can be connected to this terminal strip using eighteen clamping points on two levels. The agate gray housing is made of polyamide (PA66) for insulation, the clamping spring is made of chrome-nickel spring steel (CrNi), and the contacts are made of electrolytic copper (ECu). Tin is used for coating the contact surfaces. A push-button is used to operate this PCB terminal block. THT is used to solder the PCB terminal block. The conductor is designed to be inserted into the board at a 45° angle.. The solder pins, which are 0.5 x 0.75 mm in cross-section and 4 mm long, are laid out over the entire terminal strip (in-line). There are one solder pin per potential.<br/>